diff --git a/tags/paradiseo-ix86-1.1/.mpd.conf b/tags/paradiseo-ix86-1.1/.mpd.conf
new file mode 100644
index 000000000..bf47811ab
--- /dev/null
+++ b/tags/paradiseo-ix86-1.1/.mpd.conf
@@ -0,0 +1 @@
+secretword=Nothing
diff --git a/tags/paradiseo-ix86-1.1/AUTHORS b/tags/paradiseo-ix86-1.1/AUTHORS
new file mode 100644
index 000000000..801947d9a
--- /dev/null
+++ b/tags/paradiseo-ix86-1.1/AUTHORS
@@ -0,0 +1,10 @@
+Jean-Charles Boisson
+Sébastien Cahon
+Clive Canape
+Laetitia Jourdan
+Thomas Legrand
+Arnaud Liefooghe
+Nouredine Melab
+El-Ghazali Talbi
+Alexandru-Adrian Tantar
+
diff --git a/tags/paradiseo-ix86-1.1/INSTALL b/tags/paradiseo-ix86-1.1/INSTALL
new file mode 100644
index 000000000..992e88867
--- /dev/null
+++ b/tags/paradiseo-ix86-1.1/INSTALL
@@ -0,0 +1,124 @@
+
+==========================================================================================
+                       RELEASE		
+==========================================================================================
+
+The current release is paradiseo-ix86-1.1
+
+==========================================================================================
+                      BUILDING PARADISEO FULL PACKAGE
+==========================================================================================
+The basic installation procedure must be done in the directory 
+which contains the extracted archive.
+
+ --> Example : source installParadiseo.sh
+
+Please try source installParadiseo.sh --help  for further information
+
+==========================================================================================
+                       DIRECTORY STRUCTURE
+==========================================================================================
+After unpacking the archive file, you should end up with the following
+structure:
+
+.../                        Installation directory (specified with ./installParadiseo.sh)
+   |
+   |
+   +-- AUTHORS				  Author list 
+   |
+   |
+   +-- install.cmake			  ParadisEO main install config file
+   |
+   |
+   +-- installParadiseo.sh		  Install script
+   |
+   +-- lib/
+   |	   | +-- /libxml2-2.6.0.tar.bz2   LIBXML2 archive (required for ParadisEO)
+   |	   | +-- /mpich2-1.0.3.tar.gz     MPICH2 archive (required for ParadisEO)
+   |
+   |
+   + LICENCE				   Licence contents
+   |
+   |
+   +-- paradiseo-eo 			   paradiseo-eo dir
+   |
+   |
+   +-- paradiseo-mo                        paradiseo-mo dir 
+   |
+   |
+   +-- paradiseo-moeo                      paradiseo-moeo  dir
+   |   
+   |
+   +-- paradiseo-peo                       paradiseo-peo  dir
+   |
+   +-- README				   README file
+   |   
+   |
+   +-- .mpd.conf			   Paradiseo-peo config file
+
+
+==========================================================================================
+                       DIRECTORY STRUCTURE AFTER INSTALLATION
+==========================================================================================
+After running the script "installParadiseo.sh" and if the process is successful,
+you should have the following structure :
+
+.../                        Installation directory (specified with ./installParadiseo.sh)
+   |
+   |
+   +-- AUTHORS				  Author list 
+   |
+   |
+   +-- install.cmake			  ParadisEO main install config file
+   |
+   |
+   +-- installParadiseo.sh		  Install script
+   |
+   +-- lib/
+   |	   | +-- /libxml2-2.6.0.tar.bz2   LIBXML2 archive (required for ParadisEO-PEO)
+   |	   | +-- /mpich2-1.0.3.tar.gz     MPICH2 archive (required for ParadisEO-PEO)
+   |
+   +-- libxml2				   Libxml2 install directory (required for ParadisEO-PEO)
+   |
+   + LICENCE				   Licence contents
+   |
+   |
+   +-- mpich2				   Mpich2 install directory (required for ParadisEO-PEO)
+   |
+   |
+   +-- paradiseo-eo 			   paradiseo-eo dir
+   |
+   |
+   +-- paradiseo-mo                        paradiseo-mo dir 
+   |
+   |
+   +-- paradiseo-moeo                      paradiseo-moeo  dir
+   |   
+   |
+   +-- paradiseo-peo                       paradiseo-peo  dir
+   |
+   +-- README				   README file
+   |   
+   |
+   +-- .mpd.conf			   Paradiseo-peo config file
+
+
+==========================================================================================
+              NOTES
+==========================================================================================
+
+ParadisEO uses EO, a templates-based, ANSI-C++ compliant evolutionary computation library. 
+It contains classes for almost any kind of evolutionary computation you might come up to - at 
+least for the ones we could think of.
+EO Website: http://eodev.sourceforge.net/.
+EO is distributed under the GNU Lesser General Public License: http://www.gnu.org/copyleft/lesser.html
+
+
+Please read README file of each extracted directory if you have
+problems for the installation.
+
+==========================================================================================
+              CONTACT
+==========================================================================================
+For further information about ParadisEO, help or to report any
+problem : paradiseo-help@lists.gforge.inria.fr
diff --git a/tags/paradiseo-ix86-1.1/LICENSE b/tags/paradiseo-ix86-1.1/LICENSE
new file mode 100644
index 000000000..294819b46
--- /dev/null
+++ b/tags/paradiseo-ix86-1.1/LICENSE
@@ -0,0 +1,1019 @@
+CeCILL FREE SOFTWARE LICENSE AGREEMENT
+
+    Notice
+
+This Agreement is a Free Software license agreement that is the result
+of discussions between its authors in order to ensure compliance with
+the two main principles guiding its drafting:
+
+    * firstly, compliance with the principles governing the distribution
+      of Free Software: access to source code, broad rights granted to
+      users,
+    * secondly, the election of a governing law, French law, with which
+      it is conformant, both as regards the law of torts and
+      intellectual property law, and the protection that it offers to
+      both authors and holders of the economic rights over software.
+
+The authors of the CeCILL (for Ce[a] C[nrs] I[nria] L[ogiciel] L[ibre])
+license are:
+
+Commissariat à l'Energie Atomique - CEA, a public scientific, technical
+and industrial research establishment, having its principal place of
+business at 25 rue Leblanc, immeuble Le Ponant D, 75015 Paris, France.
+
+Centre National de la Recherche Scientifique - CNRS, a public scientific
+and technological establishment, having its principal place of business
+at 3 rue Michel-Ange, 75794 Paris cedex 16, France.
+
+Institut National de Recherche en Informatique et en Automatique -
+INRIA, a public scientific and technological establishment, having its
+principal place of business at Domaine de Voluceau, Rocquencourt, BP
+105, 78153 Le Chesnay cedex, France.
+
+
+    Preamble
+
+The purpose of this Free Software license agreement is to grant users
+the right to modify and redistribute the software governed by this
+license within the framework of an open source distribution model.
+
+The exercising of these rights is conditional upon certain obligations
+for users so as to preserve this status for all subsequent redistributions.
+
+In consideration of access to the source code and the rights to copy,
+modify and redistribute granted by the license, users are provided only
+with a limited warranty and the software's author, the holder of the
+economic rights, and the successive licensors only have limited liability.
+
+In this respect, the risks associated with loading, using, modifying
+and/or developing or reproducing the software by the user are brought to
+the user's attention, given its Free Software status, which may make it
+complicated to use, with the result that its use is reserved for
+developers and experienced professionals having in-depth computer
+knowledge. Users are therefore encouraged to load and test the
+suitability of the software as regards their requirements in conditions
+enabling the security of their systems and/or data to be ensured and,
+more generally, to use and operate it in the same conditions of
+security. This Agreement may be freely reproduced and published,
+provided it is not altered, and that no provisions are either added or
+removed herefrom.
+
+This Agreement may apply to any or all software for which the holder of
+the economic rights decides to submit the use thereof to its provisions.
+
+
+    Article 1 - DEFINITIONS
+
+For the purpose of this Agreement, when the following expressions
+commence with a capital letter, they shall have the following meaning:
+
+Agreement: means this license agreement, and its possible subsequent
+versions and annexes.
+
+Software: means the software in its Object Code and/or Source Code form
+and, where applicable, its documentation, "as is" when the Licensee
+accepts the Agreement.
+
+Initial Software: means the Software in its Source Code and possibly its
+Object Code form and, where applicable, its documentation, "as is" when
+it is first distributed under the terms and conditions of the Agreement.
+
+Modified Software: means the Software modified by at least one
+Contribution.
+
+Source Code: means all the Software's instructions and program lines to
+which access is required so as to modify the Software.
+
+Object Code: means the binary files originating from the compilation of
+the Source Code.
+
+Holder: means the holder(s) of the economic rights over the Initial
+Software.
+
+Licensee: means the Software user(s) having accepted the Agreement.
+
+Contributor: means a Licensee having made at least one Contribution.
+
+Licensor: means the Holder, or any other individual or legal entity, who
+distributes the Software under the Agreement.
+
+Contribution: means any or all modifications, corrections, translations,
+adaptations and/or new functions integrated into the Software by any or
+all Contributors, as well as any or all Internal Modules.
+
+Module: means a set of sources files including their documentation that
+enables supplementary functions or services in addition to those offered
+by the Software.
+
+External Module: means any or all Modules, not derived from the
+Software, so that this Module and the Software run in separate address
+spaces, with one calling the other when they are run.
+
+Internal Module: means any or all Module, connected to the Software so
+that they both execute in the same address space.
+
+GNU GPL: means the GNU General Public License version 2 or any
+subsequent version, as published by the Free Software Foundation Inc.
+
+Parties: mean both the Licensee and the Licensor.
+
+These expressions may be used both in singular and plural form.
+
+
+    Article 2 - PURPOSE
+
+The purpose of the Agreement is the grant by the Licensor to the
+Licensee of a non-exclusive, transferable and worldwide license for the
+Software as set forth in Article 5 hereinafter for the whole term of the
+protection granted by the rights over said Software. 
+
+
+    Article 3 - ACCEPTANCE
+
+3.1 The Licensee shall be deemed as having accepted the terms and
+conditions of this Agreement upon the occurrence of the first of the
+following events:
+
+    * (i) loading the Software by any or all means, notably, by
+      downloading from a remote server, or by loading from a physical
+      medium;
+    * (ii) the first time the Licensee exercises any of the rights
+      granted hereunder.
+
+3.2 One copy of the Agreement, containing a notice relating to the
+characteristics of the Software, to the limited warranty, and to the
+fact that its use is restricted to experienced users has been provided
+to the Licensee prior to its acceptance as set forth in Article 3.1
+hereinabove, and the Licensee hereby acknowledges that it has read and
+understood it.
+
+
+    Article 4 - EFFECTIVE DATE AND TERM
+
+
+      4.1 EFFECTIVE DATE
+
+The Agreement shall become effective on the date when it is accepted by
+the Licensee as set forth in Article 3.1.
+
+
+      4.2 TERM
+
+The Agreement shall remain in force for the entire legal term of
+protection of the economic rights over the Software.
+
+
+    Article 5 - SCOPE OF RIGHTS GRANTED
+
+The Licensor hereby grants to the Licensee, who accepts, the following
+rights over the Software for any or all use, and for the term of the
+Agreement, on the basis of the terms and conditions set forth hereinafter.
+
+Besides, if the Licensor owns or comes to own one or more patents
+protecting all or part of the functions of the Software or of its
+components, the Licensor undertakes not to enforce the rights granted by
+these patents against successive Licensees using, exploiting or
+modifying the Software. If these patents are transferred, the Licensor
+undertakes to have the transferees subscribe to the obligations set
+forth in this paragraph.
+
+
+      5.1 RIGHT OF USE
+
+The Licensee is authorized to use the Software, without any limitation
+as to its fields of application, with it being hereinafter specified
+that this comprises:
+
+   1. permanent or temporary reproduction of all or part of the Software
+      by any or all means and in any or all form.
+
+   2. loading, displaying, running, or storing the Software on any or
+      all medium.
+
+   3. entitlement to observe, study or test its operation so as to
+      determine the ideas and principles behind any or all constituent
+      elements of said Software. This shall apply when the Licensee
+      carries out any or all loading, displaying, running, transmission
+      or storage operation as regards the Software, that it is entitled
+      to carry out hereunder.
+
+
+      5.2 ENTITLEMENT TO MAKE CONTRIBUTIONS
+
+The right to make Contributions includes the right to translate, adapt,
+arrange, or make any or all modifications to the Software, and the right
+to reproduce the resulting software.
+
+The Licensee is authorized to make any or all Contributions to the
+Software provided that it includes an explicit notice that it is the
+author of said Contribution and indicates the date of the creation thereof.
+
+
+      5.3 RIGHT OF DISTRIBUTION
+
+In particular, the right of distribution includes the right to publish,
+transmit and communicate the Software to the general public on any or
+all medium, and by any or all means, and the right to market, either in
+consideration of a fee, or free of charge, one or more copies of the
+Software by any means.
+
+The Licensee is further authorized to distribute copies of the modified
+or unmodified Software to third parties according to the terms and
+conditions set forth hereinafter.
+
+
+        5.3.1 DISTRIBUTION OF SOFTWARE WITHOUT MODIFICATION
+
+The Licensee is authorized to distribute true copies of the Software in
+Source Code or Object Code form, provided that said distribution
+complies with all the provisions of the Agreement and is accompanied by:
+
+   1. a copy of the Agreement,
+
+   2. a notice relating to the limitation of both the Licensor's
+      warranty and liability as set forth in Articles 8 and 9,
+
+and that, in the event that only the Object Code of the Software is
+redistributed, the Licensee allows future Licensees unhindered access to
+the full Source Code of the Software by indicating how to access it, it
+being understood that the additional cost of acquiring the Source Code
+shall not exceed the cost of transferring the data.
+
+
+        5.3.2 DISTRIBUTION OF MODIFIED SOFTWARE
+
+When the Licensee makes a Contribution to the Software, the terms and
+conditions for the distribution of the resulting Modified Software
+become subject to all the provisions of this Agreement.
+
+The Licensee is authorized to distribute the Modified Software, in
+source code or object code form, provided that said distribution
+complies with all the provisions of the Agreement and is accompanied by:
+
+   1. a copy of the Agreement,
+
+   2. a notice relating to the limitation of both the Licensor's
+      warranty and liability as set forth in Articles 8 and 9,
+
+and that, in the event that only the object code of the Modified
+Software is redistributed, the Licensee allows future Licensees
+unhindered access to the full source code of the Modified Software by
+indicating how to access it, it being understood that the additional
+cost of acquiring the source code shall not exceed the cost of
+transferring the data.
+
+
+        5.3.3 DISTRIBUTION OF EXTERNAL MODULES
+
+When the Licensee has developed an External Module, the terms and
+conditions of this Agreement do not apply to said External Module, that
+may be distributed under a separate license agreement.
+
+
+        5.3.4 COMPATIBILITY WITH THE GNU GPL
+
+The Licensee can include a code that is subject to the provisions of one
+of the versions of the GNU GPL in the Modified or unmodified Software,
+and distribute that entire code under the terms of the same version of
+the GNU GPL.
+
+The Licensee can include the Modified or unmodified Software in a code
+that is subject to the provisions of one of the versions of the GNU GPL,
+and distribute that entire code under the terms of the same version of
+the GNU GPL.
+
+
+    Article 6 - INTELLECTUAL PROPERTY
+
+
+      6.1 OVER THE INITIAL SOFTWARE
+
+The Holder owns the economic rights over the Initial Software. Any or
+all use of the Initial Software is subject to compliance with the terms
+and conditions under which the Holder has elected to distribute its work
+and no one shall be entitled to modify the terms and conditions for the
+distribution of said Initial Software.
+
+The Holder undertakes that the Initial Software will remain ruled at
+least by this Agreement, for the duration set forth in Article 4.2.
+
+
+      6.2 OVER THE CONTRIBUTIONS
+
+The Licensee who develops a Contribution is the owner of the
+intellectual property rights over this Contribution as defined by
+applicable law.
+
+
+      6.3 OVER THE EXTERNAL MODULES
+
+The Licensee who develops an External Module is the owner of the
+intellectual property rights over this External Module as defined by
+applicable law and is free to choose the type of agreement that shall
+govern its distribution.
+
+
+      6.4 JOINT PROVISIONS
+
+The Licensee expressly undertakes:
+
+   1. not to remove, or modify, in any manner, the intellectual property
+      notices attached to the Software;
+
+   2. to reproduce said notices, in an identical manner, in the copies
+      of the Software modified or not.
+
+The Licensee undertakes not to directly or indirectly infringe the
+intellectual property rights of the Holder and/or Contributors on the
+Software and to take, where applicable, vis-à-vis its staff, any and all
+measures required to ensure respect of said intellectual property rights
+of the Holder and/or Contributors.
+
+
+    Article 7 - RELATED SERVICES
+
+7.1 Under no circumstances shall the Agreement oblige the Licensor to
+provide technical assistance or maintenance services for the Software.
+
+However, the Licensor is entitled to offer this type of services. The
+terms and conditions of such technical assistance, and/or such
+maintenance, shall be set forth in a separate instrument. Only the
+Licensor offering said maintenance and/or technical assistance services
+shall incur liability therefor.
+
+7.2 Similarly, any Licensor is entitled to offer to its licensees, under
+its sole responsibility, a warranty, that shall only be binding upon
+itself, for the redistribution of the Software and/or the Modified
+Software, under terms and conditions that it is free to decide. Said
+warranty, and the financial terms and conditions of its application,
+shall be subject of a separate instrument executed between the Licensor
+and the Licensee.
+
+
+    Article 8 - LIABILITY
+
+8.1 Subject to the provisions of Article 8.2, the Licensee shall be
+entitled to claim compensation for any direct loss it may have suffered
+from the Software as a result of a fault on the part of the relevant
+Licensor, subject to providing evidence thereof.
+
+8.2 The Licensor's liability is limited to the commitments made under
+this Agreement and shall not be incurred as a result of in particular:
+(i) loss due the Licensee's total or partial failure to fulfill its
+obligations, (ii) direct or consequential loss that is suffered by the
+Licensee due to the use or performance of the Software, and (iii) more
+generally, any consequential loss. In particular the Parties expressly
+agree that any or all pecuniary or business loss (i.e. loss of data,
+loss of profits, operating loss, loss of customers or orders,
+opportunity cost, any disturbance to business activities) or any or all
+legal proceedings instituted against the Licensee by a third party,
+shall constitute consequential loss and shall not provide entitlement to
+any or all compensation from the Licensor.
+
+
+    Article 9 - WARRANTY
+
+9.1 The Licensee acknowledges that the scientific and technical
+state-of-the-art when the Software was distributed did not enable all
+possible uses to be tested and verified, nor for the presence of
+possible defects to be detected. In this respect, the Licensee's
+attention has been drawn to the risks associated with loading, using,
+modifying and/or developing and reproducing the Software which are
+reserved for experienced users.
+
+The Licensee shall be responsible for verifying, by any or all means,
+the suitability of the product for its requirements, its good working
+order, and for ensuring that it shall not cause damage to either persons
+or properties.
+
+9.2 The Licensor hereby represents, in good faith, that it is entitled
+to grant all the rights over the Software (including in particular the
+rights set forth in Article 5).
+
+9.3 The Licensee acknowledges that the Software is supplied "as is" by
+the Licensor without any other express or tacit warranty, other than
+that provided for in Article 9.2 and, in particular, without any warranty 
+as to its commercial value, its secured, safe, innovative or relevant
+nature.
+
+Specifically, the Licensor does not warrant that the Software is free
+from any error, that it will operate without interruption, that it will
+be compatible with the Licensee's own equipment and software
+configuration, nor that it will meet the Licensee's requirements.
+
+9.4 The Licensor does not either expressly or tacitly warrant that the
+Software does not infringe any third party intellectual property right
+relating to a patent, software or any other property right. Therefore,
+the Licensor disclaims any and all liability towards the Licensee
+arising out of any or all proceedings for infringement that may be
+instituted in respect of the use, modification and redistribution of the
+Software. Nevertheless, should such proceedings be instituted against
+the Licensee, the Licensor shall provide it with technical and legal
+assistance for its defense. Such technical and legal assistance shall be
+decided on a case-by-case basis between the relevant Licensor and the
+Licensee pursuant to a memorandum of understanding. The Licensor
+disclaims any and all liability as regards the Licensee's use of the
+name of the Software. No warranty is given as regards the existence of
+prior rights over the name of the Software or as regards the existence
+of a trademark.
+
+
+    Article 10 - TERMINATION
+
+10.1 In the event of a breach by the Licensee of its obligations
+hereunder, the Licensor may automatically terminate this Agreement
+thirty (30) days after notice has been sent to the Licensee and has
+remained ineffective.
+
+10.2 A Licensee whose Agreement is terminated shall no longer be
+authorized to use, modify or distribute the Software. However, any
+licenses that it may have granted prior to termination of the Agreement
+shall remain valid subject to their having been granted in compliance
+with the terms and conditions hereof.
+
+
+    Article 11 - MISCELLANEOUS
+
+
+      11.1 EXCUSABLE EVENTS
+
+Neither Party shall be liable for any or all delay, or failure to
+perform the Agreement, that may be attributable to an event of force
+majeure, an act of God or an outside cause, such as defective
+functioning or interruptions of the electricity or telecommunications
+networks, network paralysis following a virus attack, intervention by
+government authorities, natural disasters, water damage, earthquakes,
+fire, explosions, strikes and labor unrest, war, etc.
+
+11.2 Any failure by either Party, on one or more occasions, to invoke
+one or more of the provisions hereof, shall under no circumstances be
+interpreted as being a waiver by the interested Party of its right to
+invoke said provision(s) subsequently.
+
+11.3 The Agreement cancels and replaces any or all previous agreements,
+whether written or oral, between the Parties and having the same
+purpose, and constitutes the entirety of the agreement between said
+Parties concerning said purpose. No supplement or modification to the
+terms and conditions hereof shall be effective as between the Parties
+unless it is made in writing and signed by their duly authorized
+representatives.
+
+11.4 In the event that one or more of the provisions hereof were to
+conflict with a current or future applicable act or legislative text,
+said act or legislative text shall prevail, and the Parties shall make
+the necessary amendments so as to comply with said act or legislative
+text. All other provisions shall remain effective. Similarly, invalidity
+of a provision of the Agreement, for any reason whatsoever, shall not
+cause the Agreement as a whole to be invalid.
+
+
+      11.5 LANGUAGE
+
+The Agreement is drafted in both French and English and both versions
+are deemed authentic.
+
+
+    Article 12 - NEW VERSIONS OF THE AGREEMENT
+
+12.1 Any person is authorized to duplicate and distribute copies of this
+Agreement.
+
+12.2 So as to ensure coherence, the wording of this Agreement is
+protected and may only be modified by the authors of the License, who
+reserve the right to periodically publish updates or new versions of the
+Agreement, each with a separate number. These subsequent versions may
+address new issues encountered by Free Software.
+
+12.3 Any Software distributed under a given version of the Agreement may
+only be subsequently distributed under the same version of the Agreement
+or a subsequent version, subject to the provisions of Article 5.3.4.
+
+
+    Article 13 - GOVERNING LAW AND JURISDICTION
+
+13.1 The Agreement is governed by French law. The Parties agree to
+endeavor to seek an amicable solution to any disagreements or disputes
+that may arise during the performance of the Agreement.
+
+13.2 Failing an amicable solution within two (2) months as from their
+occurrence, and unless emergency proceedings are necessary, the
+disagreements or disputes shall be referred to the Paris Courts having
+jurisdiction, by the more diligent Party.
+
+
+Version 2.0 dated 2006-09-05.
+
+------------------------------------------------------------------------------
+
+CONTRAT DE LICENCE DE LOGICIEL LIBRE CeCILL
+
+
+    Avertissement
+
+Ce contrat est une licence de logiciel libre issue d'une concertation
+entre ses auteurs afin que le respect de deux grands principes préside à
+sa rédaction:
+
+    * d'une part, le respect des principes de diffusion des logiciels
+      libres: accès au code source, droits étendus conférés aux
+      utilisateurs,
+    * d'autre part, la désignation d'un droit applicable, le droit
+      français, auquel elle est conforme, tant au regard du droit de la
+      responsabilité civile que du droit de la propriété intellectuelle
+      et de la protection qu'il offre aux auteurs et titulaires des
+      droits patrimoniaux sur un logiciel.
+
+Les auteurs de la licence CeCILL (pour Ce[a] C[nrs] I[nria] L[ogiciel]
+L[ibre]) sont:
+
+Commissariat à l'Energie Atomique - CEA, établissement public de
+recherche à caractère scientifique, technique et industriel, dont le
+siège est situé 25 rue Leblanc, immeuble Le Ponant D, 75015 Paris.
+
+Centre National de la Recherche Scientifique - CNRS, établissement
+public à caractère scientifique et technologique, dont le siège est
+situé 3 rue Michel-Ange, 75794 Paris cedex 16.
+
+Institut National de Recherche en Informatique et en Automatique -
+INRIA, établissement public à caractère scientifique et technologique,
+dont le siège est situé Domaine de Voluceau, Rocquencourt, BP 105, 78153
+Le Chesnay cedex.
+
+
+    Préambule
+
+Ce contrat est une licence de logiciel libre dont l'objectif est de
+conférer aux utilisateurs la liberté de modification et de
+redistribution du logiciel régi par cette licence dans le cadre d'un
+modèle de diffusion en logiciel libre.
+
+L'exercice de ces libertés est assorti de certains devoirs à la charge
+des utilisateurs afin de préserver ce statut au cours des
+redistributions ultérieures.
+
+L'accessibilité au code source et les droits de copie, de modification
+et de redistribution qui en découlent ont pour contrepartie de n'offrir
+aux utilisateurs qu'une garantie limitée et de ne faire peser sur
+l'auteur du logiciel, le titulaire des droits patrimoniaux et les
+concédants successifs qu'une responsabilité restreinte.
+
+A cet égard l'attention de l'utilisateur est attirée sur les risques
+associés au chargement, à l'utilisation, à la modification et/ou au
+développement et à la reproduction du logiciel par l'utilisateur étant
+donné sa spécificité de logiciel libre, qui peut le rendre complexe à
+manipuler et qui le réserve donc à des développeurs ou des
+professionnels avertis possédant des connaissances informatiques
+approfondies. Les utilisateurs sont donc invités à charger et tester
+l'adéquation du logiciel à leurs besoins dans des conditions permettant
+d'assurer la sécurité de leurs systèmes et/ou de leurs données et, plus
+généralement, à l'utiliser et l'exploiter dans les mêmes conditions de
+sécurité. Ce contrat peut être reproduit et diffusé librement, sous
+réserve de le conserver en l'état, sans ajout ni suppression de clauses.
+
+Ce contrat est susceptible de s'appliquer à tout logiciel dont le
+titulaire des droits patrimoniaux décide de soumettre l'exploitation aux
+dispositions qu'il contient.
+
+
+    Article 1 - DEFINITIONS
+
+Dans ce contrat, les termes suivants, lorsqu'ils seront écrits avec une
+lettre capitale, auront la signification suivante:
+
+Contrat: désigne le présent contrat de licence, ses éventuelles versions
+postérieures et annexes.
+
+Logiciel: désigne le logiciel sous sa forme de Code Objet et/ou de Code
+Source et le cas échéant sa documentation, dans leur état au moment de
+l'acceptation du Contrat par le Licencié.
+
+Logiciel Initial: désigne le Logiciel sous sa forme de Code Source et
+éventuellement de Code Objet et le cas échéant sa documentation, dans
+leur état au moment de leur première diffusion sous les termes du Contrat.
+
+Logiciel Modifié: désigne le Logiciel modifié par au moins une
+Contribution.
+
+Code Source: désigne l'ensemble des instructions et des lignes de
+programme du Logiciel et auquel l'accès est nécessaire en vue de
+modifier le Logiciel.
+
+Code Objet: désigne les fichiers binaires issus de la compilation du
+Code Source.
+
+Titulaire: désigne le ou les détenteurs des droits patrimoniaux d'auteur
+sur le Logiciel Initial.
+
+Licencié: désigne le ou les utilisateurs du Logiciel ayant accepté le
+Contrat.
+
+Contributeur: désigne le Licencié auteur d'au moins une Contribution.
+
+Concédant: désigne le Titulaire ou toute personne physique ou morale
+distribuant le Logiciel sous le Contrat.
+
+Contribution: désigne l'ensemble des modifications, corrections,
+traductions, adaptations et/ou nouvelles fonctionnalités intégrées dans
+le Logiciel par tout Contributeur, ainsi que tout Module Interne.
+
+Module: désigne un ensemble de fichiers sources y compris leur
+documentation qui permet de réaliser des fonctionnalités ou services
+supplémentaires à ceux fournis par le Logiciel.
+
+Module Externe: désigne tout Module, non dérivé du Logiciel, tel que ce
+Module et le Logiciel s'exécutent dans des espaces d'adressage
+différents, l'un appelant l'autre au moment de leur exécution.
+
+Module Interne: désigne tout Module lié au Logiciel de telle sorte
+qu'ils s'exécutent dans le même espace d'adressage.
+
+GNU GPL: désigne la GNU General Public License dans sa version 2 ou
+toute version ultérieure, telle que publiée par Free Software Foundation
+Inc.
+
+Parties: désigne collectivement le Licencié et le Concédant.
+
+Ces termes s'entendent au singulier comme au pluriel.
+
+
+    Article 2 - OBJET
+
+Le Contrat a pour objet la concession par le Concédant au Licencié d'une
+licence non exclusive, cessible et mondiale du Logiciel telle que
+définie ci-après à l'article 5 pour toute la durée de protection des droits
+portant sur ce Logiciel.
+
+
+    Article 3 - ACCEPTATION
+
+3.1 L'acceptation par le Licencié des termes du Contrat est réputée
+acquise du fait du premier des faits suivants:
+
+    * (i) le chargement du Logiciel par tout moyen notamment par
+      téléchargement à partir d'un serveur distant ou par chargement à
+      partir d'un support physique;
+    * (ii) le premier exercice par le Licencié de l'un quelconque des
+      droits concédés par le Contrat.
+
+3.2 Un exemplaire du Contrat, contenant notamment un avertissement
+relatif aux spécificités du Logiciel, à la restriction de garantie et à
+la limitation à un usage par des utilisateurs expérimentés a été mis à
+disposition du Licencié préalablement à son acceptation telle que
+définie à l'article 3.1 ci dessus et le Licencié reconnaît en avoir pris
+connaissance.
+
+
+    Article 4 - ENTREE EN VIGUEUR ET DUREE
+
+
+      4.1 ENTREE EN VIGUEUR
+
+Le Contrat entre en vigueur à la date de son acceptation par le Licencié
+telle que définie en 3.1.
+
+
+      4.2 DUREE
+
+Le Contrat produira ses effets pendant toute la durée légale de
+protection des droits patrimoniaux portant sur le Logiciel.
+
+
+    Article 5 - ETENDUE DES DROITS CONCEDES
+
+Le Concédant concède au Licencié, qui accepte, les droits suivants sur
+le Logiciel pour toutes destinations et pour la durée du Contrat dans
+les conditions ci-après détaillées.
+
+Par ailleurs, si le Concédant détient ou venait à détenir un ou
+plusieurs brevets d'invention protégeant tout ou partie des
+fonctionnalités du Logiciel ou de ses composants, il s'engage à ne pas
+opposer les éventuels droits conférés par ces brevets aux Licenciés
+successifs qui utiliseraient, exploiteraient ou modifieraient le
+Logiciel. En cas de cession de ces brevets, le Concédant s'engage à
+faire reprendre les obligations du présent alinéa aux cessionnaires.
+
+
+      5.1 DROIT D'UTILISATION
+
+Le Licencié est autorisé à utiliser le Logiciel, sans restriction quant
+aux domaines d'application, étant ci-après précisé que cela comporte:
+
+   1. la reproduction permanente ou provisoire du Logiciel en tout ou
+      partie par tout moyen et sous toute forme.
+
+   2. le chargement, l'affichage, l'exécution, ou le stockage du
+      Logiciel sur tout support.
+
+   3. la possibilité d'en observer, d'en étudier, ou d'en tester le
+      fonctionnement afin de déterminer les idées et principes qui sont
+      à la base de n'importe quel élément de ce Logiciel; et ceci,
+      lorsque le Licencié effectue toute opération de chargement,
+      d'affichage, d'exécution, de transmission ou de stockage du
+      Logiciel qu'il est en droit d'effectuer en vertu du Contrat.
+
+
+      5.2 DROIT D'APPORTER DES CONTRIBUTIONS
+
+Le droit d'apporter des Contributions comporte le droit de traduire,
+d'adapter, d'arranger ou d'apporter toute autre modification au Logiciel
+et le droit de reproduire le logiciel en résultant.
+
+Le Licencié est autorisé à apporter toute Contribution au Logiciel sous
+réserve de mentionner, de façon explicite, son nom en tant qu'auteur de
+cette Contribution et la date de création de celle-ci.
+
+
+      5.3 DROIT DE DISTRIBUTION
+
+Le droit de distribution comporte notamment le droit de diffuser, de
+transmettre et de communiquer le Logiciel au public sur tout support et
+par tout moyen ainsi que le droit de mettre sur le marché à titre
+onéreux ou gratuit, un ou des exemplaires du Logiciel par tout procédé.
+
+Le Licencié est autorisé à distribuer des copies du Logiciel, modifié ou
+non, à des tiers dans les conditions ci-après détaillées.
+
+
+        5.3.1 DISTRIBUTION DU LOGICIEL SANS MODIFICATION
+
+Le Licencié est autorisé à distribuer des copies conformes du Logiciel,
+sous forme de Code Source ou de Code Objet, à condition que cette
+distribution respecte les dispositions du Contrat dans leur totalité et
+soit accompagnée:
+
+   1. d'un exemplaire du Contrat,
+
+   2. d'un avertissement relatif à la restriction de garantie et de
+      responsabilité du Concédant telle que prévue aux articles 8
+      et 9,
+
+et que, dans le cas où seul le Code Objet du Logiciel est redistribué,
+le Licencié permette aux futurs Licenciés d'accéder facilement au Code
+Source complet du Logiciel en indiquant les modalités d'accès, étant
+entendu que le coût additionnel d'acquisition du Code Source ne devra
+pas excéder le simple coût de transfert des données.
+
+
+        5.3.2 DISTRIBUTION DU LOGICIEL MODIFIE
+
+Lorsque le Licencié apporte une Contribution au Logiciel, les conditions
+de distribution du Logiciel Modifié en résultant sont alors soumises à
+l'intégralité des dispositions du Contrat.
+
+Le Licencié est autorisé à distribuer le Logiciel Modifié, sous forme de
+code source ou de code objet, à condition que cette distribution
+respecte les dispositions du Contrat dans leur totalité et soit
+accompagnée:
+
+   1. d'un exemplaire du Contrat,
+
+   2. d'un avertissement relatif à la restriction de garantie et de
+      responsabilité du Concédant telle que prévue aux articles 8
+      et 9,
+
+et que, dans le cas où seul le code objet du Logiciel Modifié est
+redistribué, le Licencié permette aux futurs Licenciés d'accéder
+facilement au code source complet du Logiciel Modifié en indiquant les
+modalités d'accès, étant entendu que le coût additionnel d'acquisition
+du code source ne devra pas excéder le simple coût de transfert des données.
+
+
+        5.3.3 DISTRIBUTION DES MODULES EXTERNES
+
+Lorsque le Licencié a développé un Module Externe les conditions du
+Contrat ne s'appliquent pas à ce Module Externe, qui peut être distribué
+sous un contrat de licence différent.
+
+
+        5.3.4 COMPATIBILITE AVEC LA LICENCE GNU GPL
+
+Le Licencié peut inclure un code soumis aux dispositions d'une des
+versions de la licence GNU GPL dans le Logiciel modifié ou non et
+distribuer l'ensemble sous les conditions de la même version de la
+licence GNU GPL.
+
+Le Licencié peut inclure le Logiciel modifié ou non dans un code soumis
+aux dispositions d'une des versions de la licence GNU GPL et distribuer
+l'ensemble sous les conditions de la même version de la licence GNU GPL.
+
+
+    Article 6 - PROPRIETE INTELLECTUELLE
+
+
+      6.1 SUR LE LOGICIEL INITIAL
+
+Le Titulaire est détenteur des droits patrimoniaux sur le Logiciel
+Initial. Toute utilisation du Logiciel Initial est soumise au respect
+des conditions dans lesquelles le Titulaire a choisi de diffuser son
+oeuvre et nul autre n'a la faculté de modifier les conditions de
+diffusion de ce Logiciel Initial.
+
+Le Titulaire s'engage à ce que le Logiciel Initial reste au moins régi
+par le Contrat et ce, pour la durée visée à l'article 4.2.
+
+
+      6.2 SUR LES CONTRIBUTIONS
+
+Le Licencié qui a développé une Contribution est titulaire sur celle-ci
+des droits de propriété intellectuelle dans les conditions définies par
+la législation applicable.
+
+
+      6.3 SUR LES MODULES EXTERNES
+
+Le Licencié qui a développé un Module Externe est titulaire sur celui-ci
+des droits de propriété intellectuelle dans les conditions définies par
+la législation applicable et reste libre du choix du contrat régissant
+sa diffusion.
+
+
+      6.4 DISPOSITIONS COMMUNES
+
+Le Licencié s'engage expressément:
+
+   1. à ne pas supprimer ou modifier de quelque manière que ce soit les
+      mentions de propriété intellectuelle apposées sur le Logiciel;
+
+   2. à reproduire à l'identique lesdites mentions de propriété
+      intellectuelle sur les copies du Logiciel modifié ou non.
+
+Le Licencié s'engage à ne pas porter atteinte, directement ou
+indirectement, aux droits de propriété intellectuelle du Titulaire et/ou
+des Contributeurs sur le Logiciel et à prendre, le cas échéant, à
+l'égard de son personnel toutes les mesures nécessaires pour assurer le
+respect des dits droits de propriété intellectuelle du Titulaire et/ou
+des Contributeurs.
+
+
+    Article 7 - SERVICES ASSOCIES
+
+7.1 Le Contrat n'oblige en aucun cas le Concédant à la réalisation de
+prestations d'assistance technique ou de maintenance du Logiciel.
+
+Cependant le Concédant reste libre de proposer ce type de services. Les
+termes et conditions d'une telle assistance technique et/ou d'une telle
+maintenance seront alors déterminés dans un acte séparé. Ces actes de
+maintenance et/ou assistance technique n'engageront que la seule
+responsabilité du Concédant qui les propose.
+
+7.2 De même, tout Concédant est libre de proposer, sous sa seule
+responsabilité, à ses licenciés une garantie, qui n'engagera que lui,
+lors de la redistribution du Logiciel et/ou du Logiciel Modifié et ce,
+dans les conditions qu'il souhaite. Cette garantie et les modalités
+financières de son application feront l'objet d'un acte séparé entre le
+Concédant et le Licencié.
+
+
+    Article 8 - RESPONSABILITE
+
+8.1 Sous réserve des dispositions de l'article 8.2, le Licencié a la 
+faculté, sous réserve de prouver la faute du Concédant concerné, de
+solliciter la réparation du préjudice direct qu'il subirait du fait du
+Logiciel et dont il apportera la preuve.
+
+8.2 La responsabilité du Concédant est limitée aux engagements pris en
+application du Contrat et ne saurait être engagée en raison notamment:
+(i) des dommages dus à l'inexécution, totale ou partielle, de ses
+obligations par le Licencié, (ii) des dommages directs ou indirects
+découlant de l'utilisation ou des performances du Logiciel subis par le
+Licencié et (iii) plus généralement d'un quelconque dommage indirect. En
+particulier, les Parties conviennent expressément que tout préjudice
+financier ou commercial (par exemple perte de données, perte de
+bénéfices, perte d'exploitation, perte de clientèle ou de commandes,
+manque à gagner, trouble commercial quelconque) ou toute action dirigée
+contre le Licencié par un tiers, constitue un dommage indirect et
+n'ouvre pas droit à réparation par le Concédant.
+
+
+    Article 9 - GARANTIE
+
+9.1 Le Licencié reconnaît que l'état actuel des connaissances
+scientifiques et techniques au moment de la mise en circulation du
+Logiciel ne permet pas d'en tester et d'en vérifier toutes les
+utilisations ni de détecter l'existence d'éventuels défauts. L'attention
+du Licencié a été attirée sur ce point sur les risques associés au
+chargement, à l'utilisation, la modification et/ou au développement et à
+la reproduction du Logiciel qui sont réservés à des utilisateurs avertis.
+
+Il relève de la responsabilité du Licencié de contrôler, par tous
+moyens, l'adéquation du produit à ses besoins, son bon fonctionnement et
+de s'assurer qu'il ne causera pas de dommages aux personnes et aux biens.
+
+9.2 Le Concédant déclare de bonne foi être en droit de concéder
+l'ensemble des droits attachés au Logiciel (comprenant notamment les
+droits visés à l'article 5).
+
+9.3 Le Licencié reconnaît que le Logiciel est fourni "en l'état" par le
+Concédant sans autre garantie, expresse ou tacite, que celle prévue à
+l'article 9.2 et notamment sans aucune garantie sur sa valeur commerciale, 
+son caractère sécurisé, innovant ou pertinent.
+
+En particulier, le Concédant ne garantit pas que le Logiciel est exempt
+d'erreur, qu'il fonctionnera sans interruption, qu'il sera compatible
+avec l'équipement du Licencié et sa configuration logicielle ni qu'il
+remplira les besoins du Licencié.
+
+9.4 Le Concédant ne garantit pas, de manière expresse ou tacite, que le
+Logiciel ne porte pas atteinte à un quelconque droit de propriété
+intellectuelle d'un tiers portant sur un brevet, un logiciel ou sur tout
+autre droit de propriété. Ainsi, le Concédant exclut toute garantie au
+profit du Licencié contre les actions en contrefaçon qui pourraient être
+diligentées au titre de l'utilisation, de la modification, et de la
+redistribution du Logiciel. Néanmoins, si de telles actions sont
+exercées contre le Licencié, le Concédant lui apportera son aide
+technique et juridique pour sa défense. Cette aide technique et
+juridique est déterminée au cas par cas entre le Concédant concerné et
+le Licencié dans le cadre d'un protocole d'accord. Le Concédant dégage
+toute responsabilité quant à l'utilisation de la dénomination du
+Logiciel par le Licencié. Aucune garantie n'est apportée quant à
+l'existence de droits antérieurs sur le nom du Logiciel et sur
+l'existence d'une marque.
+
+
+    Article 10 - RESILIATION
+
+10.1 En cas de manquement par le Licencié aux obligations mises à sa
+charge par le Contrat, le Concédant pourra résilier de plein droit le
+Contrat trente (30) jours après notification adressée au Licencié et
+restée sans effet.
+
+10.2 Le Licencié dont le Contrat est résilié n'est plus autorisé à
+utiliser, modifier ou distribuer le Logiciel. Cependant, toutes les
+licences qu'il aura concédées antérieurement à la résiliation du Contrat
+resteront valides sous réserve qu'elles aient été effectuées en
+conformité avec le Contrat.
+
+
+    Article 11 - DISPOSITIONS DIVERSES
+
+
+      11.1 CAUSE EXTERIEURE
+
+Aucune des Parties ne sera responsable d'un retard ou d'une défaillance
+d'exécution du Contrat qui serait dû à un cas de force majeure, un cas
+fortuit ou une cause extérieure, telle que, notamment, le mauvais
+fonctionnement ou les interruptions du réseau électrique ou de
+télécommunication, la paralysie du réseau liée à une attaque
+informatique, l'intervention des autorités gouvernementales, les
+catastrophes naturelles, les dégâts des eaux, les tremblements de terre,
+le feu, les explosions, les grèves et les conflits sociaux, l'état de
+guerre...
+
+11.2 Le fait, par l'une ou l'autre des Parties, d'omettre en une ou
+plusieurs occasions de se prévaloir d'une ou plusieurs dispositions du
+Contrat, ne pourra en aucun cas impliquer renonciation par la Partie
+intéressée à s'en prévaloir ultérieurement.
+
+11.3 Le Contrat annule et remplace toute convention antérieure, écrite
+ou orale, entre les Parties sur le même objet et constitue l'accord
+entier entre les Parties sur cet objet. Aucune addition ou modification
+aux termes du Contrat n'aura d'effet à l'égard des Parties à moins
+d'être faite par écrit et signée par leurs représentants dûment habilités.
+
+11.4 Dans l'hypothèse où une ou plusieurs des dispositions du Contrat
+s'avèrerait contraire à une loi ou à un texte applicable, existants ou
+futurs, cette loi ou ce texte prévaudrait, et les Parties feraient les
+amendements nécessaires pour se conformer à cette loi ou à ce texte.
+Toutes les autres dispositions resteront en vigueur. De même, la
+nullité, pour quelque raison que ce soit, d'une des dispositions du
+Contrat ne saurait entraîner la nullité de l'ensemble du Contrat.
+
+
+      11.5 LANGUE
+
+Le Contrat est rédigé en langue française et en langue anglaise, ces
+deux versions faisant également foi.
+
+
+    Article 12 - NOUVELLES VERSIONS DU CONTRAT
+
+12.1 Toute personne est autorisée à copier et distribuer des copies de
+ce Contrat.
+
+12.2 Afin d'en préserver la cohérence, le texte du Contrat est protégé
+et ne peut être modifié que par les auteurs de la licence, lesquels se
+réservent le droit de publier périodiquement des mises à jour ou de
+nouvelles versions du Contrat, qui posséderont chacune un numéro
+distinct. Ces versions ultérieures seront susceptibles de prendre en
+compte de nouvelles problématiques rencontrées par les logiciels libres.
+
+12.3 Tout Logiciel diffusé sous une version donnée du Contrat ne pourra
+faire l'objet d'une diffusion ultérieure que sous la même version du
+Contrat ou une version postérieure, sous réserve des dispositions de
+l'article 5.3.4.
+
+
+    Article 13 - LOI APPLICABLE ET COMPETENCE TERRITORIALE
+
+13.1 Le Contrat est régi par la loi française. Les Parties conviennent
+de tenter de régler à l'amiable les différends ou litiges qui
+viendraient à se produire par suite ou à l'occasion du Contrat.
+
+13.2 A défaut d'accord amiable dans un délai de deux (2) mois à compter
+de leur survenance et sauf situation relevant d'une procédure d'urgence,
+les différends ou litiges seront portés par la Partie la plus diligente
+devant les Tribunaux compétents de Paris.
+
+
+Version 2.0 du 2006-09-05.
+
diff --git a/tags/paradiseo-ix86-1.1/README b/tags/paradiseo-ix86-1.1/README
new file mode 100644
index 000000000..838fc5096
--- /dev/null
+++ b/tags/paradiseo-ix86-1.1/README
@@ -0,0 +1,131 @@
+
+==========================================================================================
+                       RELEASE		
+==========================================================================================
+
+The current release is paradiseo-ix86-1.1
+
+==========================================================================================
+                      BUILDING PARADISEO FULL PACKAGE
+==========================================================================================
+The basic installation procedure must be done in the directory 
+which contains the extracted archive.
+
+ --> Example : source installParadiseo.sh
+
+Please try source installParadiseo.sh --help  for further information
+
+==========================================================================================
+                       DIRECTORY STRUCTURE
+==========================================================================================
+After unpacking the archive file, you should end up with the following
+structure:
+
+.../                        Installation directory (specified with ./installParadiseo.sh)
+   |
+   |
+   +-- AUTHORS				  Author list 
+   |
+   |
+   +-- INSTALL
+   |
+   |
+   +-- install.cmake			  ParadisEO main install config file
+   |
+   |
+   +-- installParadiseo.sh		  Install script
+   |
+   +-- lib/
+   |	   | +-- /libxml2-2.6.0.tar.bz2   LIBXML2 archive (required for ParadisEO)
+   |	   | +-- /mpich2-1.0.3.tar.gz     MPICH2 archive (required for ParadisEO)
+   |
+   |
+   + LICENSE				   Licence contents
+   |
+   |
+   +-- paradiseo-eo 			   paradiseo-eo dir
+   |
+   |
+   +-- paradiseo-mo                        paradiseo-mo dir 
+   |
+   |
+   +-- paradiseo-moeo                      paradiseo-moeo  dir
+   |   
+   |
+   +-- paradiseo-peo                       paradiseo-peo  dir
+   |
+   +-- README				   README file
+   |   
+   |
+   +-- .mpd.conf			   Paradiseo-peo config file
+
+
+==========================================================================================
+                       DIRECTORY STRUCTURE AFTER INSTALLATION
+==========================================================================================
+After running the script "installParadiseo.sh" and if the process is successful,
+you should have the following structure :
+
+.../                        Installation directory (specified with ./installParadiseo.sh)
+   |
+   |
+   +-- AUTHORS				  Author list 
+   |
+   |
+   +-- install.cmake			  ParadisEO main install config file
+   |
+   |
+   +-- installParadiseo.sh		  Install script
+   |
+   |
+   +-- INSTALL
+   |
+   |
+   +-- lib/
+   |	   | +-- /libxml2-2.6.0.tar.bz2   LIBXML2 archive (required for ParadisEO-PEO)
+   |	   | +-- /mpich2-1.0.3.tar.gz     MPICH2 archive (required for ParadisEO-PEO)
+   |
+   +-- libxml2				   Libxml2 install directory (required for ParadisEO-PEO)
+   |
+   + LICENSE				   Licence contents
+   |
+   |
+   +-- mpich2				   Mpich2 install directory (required for ParadisEO-PEO)
+   |
+   |
+   +-- paradiseo-eo 			   paradiseo-eo dir
+   |
+   |
+   +-- paradiseo-mo                        paradiseo-mo dir 
+   |
+   |
+   +-- paradiseo-moeo                      paradiseo-moeo  dir
+   |   
+   |
+   +-- paradiseo-peo                       paradiseo-peo  dir
+   |
+   +-- README				   README file
+   |   
+   |
+   +-- .mpd.conf			   Paradiseo-peo config file
+
+
+==========================================================================================
+              NOTES
+==========================================================================================
+
+ParadisEO uses EO, a templates-based, ANSI-C++ compliant evolutionary computation library. 
+It contains classes for almost any kind of evolutionary computation you might come up to - at 
+least for the ones we could think of.
+EO Website: http://eodev.sourceforge.net/.
+EO is distributed under the GNU Lesser General Public License: http://www.gnu.org/copyleft/lesser.html
+
+
+Please read README file of each extracted directory if you have
+problems for the installation.
+
+==========================================================================================
+              CONTACT
+==========================================================================================
+For further information about ParadisEO, help or to report any
+problem : paradiseo-help@lists.gforge.inria.fr
diff --git a/tags/paradiseo-ix86-1.1/install.cmake b/tags/paradiseo-ix86-1.1/install.cmake
new file mode 100644
index 000000000..9ab8bad8b
--- /dev/null
+++ b/tags/paradiseo-ix86-1.1/install.cmake
@@ -0,0 +1,126 @@
+
+
+######################################################################################
+### CMake basic configuration
+######################################################################################
+
+# check cmake version compatibility
+CMAKE_MINIMUM_REQUIRED(VERSION 2.4 FATAL_ERROR)
+
+# regular expression checking
+INCLUDE_REGULAR_EXPRESSION("^.*$" "^$")
+
+# set a language for the entire project.
+ENABLE_LANGUAGE(CXX)
+ENABLE_LANGUAGE(C)
+
+####################################################################################
+
+
+#####################################################################################
+### Include required modules & utilities
+#####################################################################################
+INCLUDE(CMakeBackwardCompatibilityCXX)
+
+INCLUDE(FindDoxygen)
+
+INCLUDE(FindGnuplot)
+
+INCLUDE(CheckLibraryExists)
+
+INCLUDE(Dart OPTIONNAL)         
+                           
+# the project can have a DartConfig.cmake file
+INCLUDE(DartConfig.cmake OPTIONNAL)
+        
+# Set a special flag if the environment is windows (should do the same in a config.g file)
+IF (WIN32)
+	ADD_DEFINITIONS(-D_WINDOWS=1)
+ENDIF (WIN32)
+######################################################################################
+
+       
+#####################################################################################
+### Manage the build type
+#####################################################################################
+
+# the user should choose the build type on windows environments,excepted under cygwin (default=none)
+SET(CMAKE_DEFAULT_BUILD_TYPE "Release" CACHE STRING "Variable that stores the default CMake build type" FORCE)
+
+FIND_PROGRAM(MEMORYCHECK_COMMAND
+    NAMES purify valgrind
+    PATHS
+    "/usr/local/bin /usr/bin [HKEY_LOCAL_MACHINE\\SOFTWARE\\Rational Software\\Purify\\Setup;InstallFolder]"
+    DOC "Path to the memory checking command, used for memory error detection.")    
+IF(NOT CMAKE_BUILD_TYPE)
+     SET( CMAKE_BUILD_TYPE 
+          ${CMAKE_DEFAULT_BUILD_TYPE} CACHE STRING 
+          "Choose the type of build, options are: Debug Release RelWithDebInfo MinSizeRel." 
+           FORCE)
+ENDIF(NOT CMAKE_BUILD_TYPE)  
+  
+IF(WIN32 AND NOT CYGWIN)
+  IF(CMAKE_CXX_COMPILER MATCHES cl)
+   IF(NOT WITH_SHARED_LIBS)
+     IF(CMAKE_GENERATOR STREQUAL "Visual Studio 8 2005" OR CMAKE_GENERATOR STREQUAL "Visual Studio 9 2008")
+       SET(CMAKE_CXX_FLAGS "/nologo /W3 /Gy")
+       SET(CMAKE_CXX_FLAGS_DEBUG "/MTd /Z7 /Od")
+       SET(CMAKE_CXX_FLAGS_RELEASE "/MT /O2")
+       SET(CMAKE_CXX_FLAGS_MINSIZEREL "/MT /O2")
+       SET(CMAKE_CXX_FLAGS_RELWITHDEBINFO "/MTd /Z7 /Od")
+       SET(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} /SUBSYSTEM:CONSOLE")  
+      ENDIF(CMAKE_GENERATOR STREQUAL "Visual Studio 8 2005" OR CMAKE_GENERATOR STREQUAL "Visual Studio 9 2008")
+   ENDIF(NOT WITH_SHARED_LIBS)
+  ENDIF(CMAKE_CXX_COMPILER MATCHES cl)  
+ELSE(WIN32 AND NOT CYGWIN)
+    IF(CMAKE_COMPILER_IS_GNUCXX)
+       SET(CMAKE_CXX_FLAGS_DEBUG  "${CMAKE_CXX_FLAGS_DEBUG} -O0 -g -fprofile-arcs -ftest-coverage -Wall -Wextra")                       
+       SET(CMAKE_CXX_FLAGS_RELEASE  "${CMAKE_CXX_FLAGS_RELEASE} -O2")
+       SET(CMAKE_CXX_FLAGS_MINSIZEREL "${CMAKE_CXX_FLAGS_MINSIZEREL} -O6")       
+    ENDIF(CMAKE_COMPILER_IS_GNUCXX)  
+ENDIF(WIN32 AND NOT CYGWIN)
+
+IF(CMAKE_BUILD_TYPE MATCHES Debug)
+    ADD_DEFINITIONS(-DCMAKE_VERBOSE_MAKEFILE=ON)
+ENDIF(CMAKE_BUILD_TYPE MATCHES Debug)
+
+#####################################################################################
+
+
+######################################################################################
+### Test config
+######################################################################################
+
+#SET(ENABLE_CMAKE_TESTING TRUE CACHE BOOL "Enable testing ?")
+
+IF (ENABLE_CMAKE_TESTING)  
+        ENABLE_TESTING()          
+ENDIF (ENABLE_CMAKE_TESTING)
+######################################################################################
+
+
+######################################################################################
+### Subdirectories that CMake should process for MO, MOEO and PEO
+######################################################################################
+
+SUBDIRS( doc src test tutorial)
+
+######################################################################################
+
+
+#######################################################################################
+### Paths to EO, MO and MOEO must be specified above.
+#######################################################################################
+
+SET(EO_SRC_DIR "${CMAKE_SOURCE_DIR}/../paradiseo-eo" CACHE PATH "ParadisEO-EO source directory" FORCE)
+SET(EO_BIN_DIR "${CMAKE_BINARY_DIR}/../../paradiseo-eo/build" CACHE PATH "ParadisEO-EO binary directory" FORCE)
+    
+SET(MO_SRC_DIR "${CMAKE_SOURCE_DIR}/../paradiseo-mo" CACHE PATH "ParadisMO-MO source directory" FORCE)
+SET(MO_BIN_DIR "${CMAKE_BINARY_DIR}/../../paradiseo-mo/build" CACHE PATH "ParadisMO-MO binary directory" FORCE)
+
+SET(MOEO_SRC_DIR "${CMAKE_SOURCE_DIR}/../paradiseo-moeo" CACHE PATH "ParadisMOEO-MOEO source directory" FORCE)
+SET(MOEO_BIN_DIR "${CMAKE_BINARY_DIR}/../../paradiseo-moeo/build" CACHE PATH "ParadisMOEO-MOEO binary directory" FORCE)
+    
+#######################################################################################
+    
+    
diff --git a/tags/paradiseo-ix86-1.1/installParadiseo.sh b/tags/paradiseo-ix86-1.1/installParadiseo.sh
new file mode 100755
index 000000000..83b347ce1
--- /dev/null
+++ b/tags/paradiseo-ix86-1.1/installParadiseo.sh
@@ -0,0 +1,1258 @@
+#!/bin/sh
+
+#########################################################################################
+#
+#	Project		:	paradisEO full package install
+#	File		:	installParadiseo.sh
+#	Comment	:	# This file attempts to install ParadisEO #
+#
+#########################################################################################
+
+# global variables
+installStartTime=$SECONDS 
+resourceKitPath=$PWD
+TAR_MSG=" "
+DIE=0
+PROG=ParadisEO
+CMAKE_PRIMARY_CONFIG_FILE=install.cmake
+HOME_PATH=$HOME
+
+# generator types available on Unix platforms
+P_UNIX_MAKEFILES=1
+P_KDEVELOP3_PROJECT=2
+P_XCODE_PROJECT=3
+G_UNIX_MAKEFILES="Unix Makefiles"
+G_KDEVELOP3_PROJECT="KDevelop3"
+G_XCODE_PROJECT="Xcode"
+
+# should we compile ParadisEO ?
+COMPILE_PARADISEO=1
+
+# Build types
+DEFAULT_BUILD_TYPE=Release
+BUILD_TYPE=$DEFAULT_BUILD_TYPE
+
+# CMake/CTest/Dart flags
+CTEST_DEFAULT_CONFIG="-D ExperimentalStart -D ExperimentalBuild"
+CTEST_CONFIG=$CTEST_DEFAULT_CONFIG
+
+# install types to select in the main menu
+P_FULL_INSTALL=1
+P_BASIC_INSTALL=2
+P_PARALLEL_INSTALL=3
+P_RM_PREVIOUS_INSTALLL=4
+P_EXIT_INSTALL=5
+
+IS_MPICH_INSTALLED=1
+IS_LIBXML2_INSTALLED=1
+USE_EXISTING_MPICH=-1
+USE_EXISTING_LIBXML2=-1
+
+# install steps
+S_INTRODUCTION=1000
+S_UNPACK_EO=1001
+S_UNPACK_LIBXML=1002
+S_UNPACK_MPICH=1003
+S_INSTALL_EO=1004
+S_INSTALL_MO=1005
+S_INSTALL_MOEO=1006
+S_INSTALL_LIBXML=1007
+S_INSTALL_MPICH=1008
+S_INSTALL_PEO=1009
+S_REMOVE_TEMP_LIBXML=1010
+S_REMOVE_TEMP_MPICH=1011
+S_CONFIGURE_ENV=1012
+S_CONFIGURE_MPD=1013
+S_PEO_CHECK=1014
+S_REMOVE_INSTALL=1015
+S_END=1016
+S_END_WITHOUT_INFO=1017
+S_CHECK_AUTOTOOLS=1018
+
+#### define what are the possible installs and their content
+
+# full install
+FULL_INSTALL="$S_INTRODUCTION $S_UNPACK_LIBXML $S_UNPACK_MPICH $S_INSTALL_EO $S_INSTALL_MO $S_INSTALL_MOEO $S_CHECK_AUTOTOOLS $S_INSTALL_LIBXML $S_REMOVE_TEMP_LIBXML $S_INSTALL_MPICH $S_REMOVE_TEMP_MPICH $S_CONFIGURE_ENV $S_INSTALL_PEO  $S_CONFIGURE_MPD $S_END"
+
+FULL_INSTALL_WITHOUT_LIBXML2="$S_INTRODUCTION $S_UNPACK_MPICH $S_INSTALL_EO $S_INSTALL_MO $S_INSTALL_MOEO $S_CHECK_AUTOTOOLS $S_INSTALL_MPICH $S_REMOVE_TEMP_MPICH $S_CONFIGURE_MPICH_ENV $S_INSTALL_PEO  $S_CONFIGURE_MPD $S_END"
+
+FULL_INSTALL_WITHOUT_MPICH2="$S_INTRODUCTION $S_UNPACK_LIBXML $S_INSTALL_EO $S_INSTALL_MO $S_INSTALL_MOEO $S_CHECK_AUTOTOOLS $S_INSTALL_LIBXML $S_REMOVE_TEMP_LIBXML $S_CONFIGURE_LIBXML2_ENV $S_INSTALL_PEO  $S_CONFIGURE_MPD $S_END"
+
+FULL_INSTALL_WITHOUT_LIBXML2_MPICH2="$S_INTRODUCTION $S_INSTALL_EO $S_INSTALL_MO $S_INSTALL_MOEO $S_INSTALL_PEO  $S_CONFIGURE_MPD $S_END_WITHOUT_INFO"
+
+# basic install
+BASIC_INSTALL="$S_INTRODUCTION $S_INSTALL_EO $S_INSTALL_MO $S_INSTALL_MOEO $S_END"
+
+# install only paradiseo-peo
+PARALLEL_INSTALL="$S_PEO_CHECK $S_INTRODUCTION $S_UNPACK_LIBXML $S_CHECK_AUTOTOOLS $S_INSTALL_LIBXML $S_REMOVE_TEMP_LIBXML $S_UNPACK_MPICH $S_INSTALL_MPICH $S_REMOVE_TEMP_MPICH $S_CONFIGURE_ENV $S_INSTALL_PEO $S_CONFIGURE_MPD $S_END"
+
+PARALLEL_INSTALL_WITHOUT_LIBXML2="$S_PEO_CHECK $S_INTRODUCTION  $S_UNPACK_MPICH $S_CHECK_AUTOTOOLS $S_INSTALL_MPICH $S_REMOVE_TEMP_MPICH $S_CONFIGURE_MPICH_ENV $S_INSTALL_PEO $S_CONFIGURE_MPD $S_END"
+
+PARALLEL_INSTALL_WITHOUT_MPICH2="$S_PEO_CHECK $S_INTRODUCTION $S_CHECK_AUTOTOOLS $S_UNPACK_LIBXML $S_INSTALL_LIBXML $S_REMOVE_TEMP_LIBXML $S_CONFIGURE_LIBXML2_ENV $S_INSTALL_PEO $S_CONFIGURE_MPD $S_END"
+
+PARALLEL_INSTALL_WITHOUT_LIBXML2_MPICH2="$S_PEO_CHECK $S_INTRODUCTION $S_INSTALL_PEO $S_CONFIGURE_MPD $S_END_WITHOUT_INFO"
+
+# remove a previous install
+RM_PREVIOUS_INSTALL="$S_REMOVE_INSTALL"
+
+#others
+LIBS_PATH=lib
+LIBXML2_ARCHIVE=libxml2-2.6.0
+LIBXML2_ARCHIVE_SUFFIX=.tar.bz2
+MPICH2_ARCHIVE=mpich2-1.0.3
+MPICH2_ARCHIVE_SUFFIX=.tar.gz
+# errors
+SUCCESSFUL_STEP=0
+EO_UNPACKING_ERROR=100
+LIBXML_UNPACKING_ERROR=104
+MPICH_UNPACKING_ERROR=105
+EO_INSTALL_ERROR=106
+MO_INSTALL_ERROR=107
+MOEO_INSTALL_ERROR=108
+PARADISEO_INSTALL_ERROR=110
+LIBXML_INSTALL_ERROR=111
+MPICH_INSTALL_ERROR=112
+REMOVE_TEMP_DIRECTORY_ERROR=113
+VAR_CONFIG_ERROR=114
+MPD_COPY_ERROR=115
+LIBXML_INSTALL_ERROR=116
+MPICH_INSTALL_ERROR=117
+PEO_CHECK_ERROR=118
+RM_PARADISEO_EO_ERROR=119
+RM_UTIL_ERROR=120
+BASIC_INSTALL_MISSING_ERROR=121
+DART_SUBMISSION_ERROR=64
+CHECK_AUTOTOOLS_ERROR=122
+
+#Date
+DATE=`/bin/date '+%Y%m%d%H%M%S'`
+# create log file
+SPY=$PWD/logs/install-paradiseo.${DATE}.log
+
+#------------------------------------------------------#
+#-- FUNCTION   :  execute_cmd		            ---#
+#------------------------------------------------------#
+#-- PARAMETERS :  				    ---#
+#--	$1 : cmd line                               ---#
+#--	$2 : comment                                ---#
+#--	$3 : spy file                               ---#
+#--	$4 : output std file                        ---#
+#--	$5 : error log file                         ---#
+#--                                                 ---#
+#------------------------------------------------------#
+#-- CODE RETURN : 0 : OK                            ---#
+#-- CODE RETURN : 1 : NOK                           ---#
+#------------------------------------------------------#
+function execute_cmd
+{
+	COMMAND=${1}
+	COMMENT=${2}
+	FIC_ESP=${3}
+	FIC_OUT=${4}
+	FIC_ERR=${5}
+
+	if [ `echo ${FIC_OUT} | wc -c` -eq 1 ]
+	then
+		FIC_OUT=${FIC_ESP}
+	fi
+
+	if [ `echo ${FIC_ERR} | wc -c` -eq 1 ]
+	then
+		FIC_ERR=${FIC_ESP}
+	fi
+
+	echo "" >> ${FIC_ESP}
+	echo "[execute_cmd][Begin][`/bin/date +%H:%M:%S`]" >> ${FIC_ESP}
+
+	echo "------------------------------------------------------------------------------------------------------------" >> ${FIC_ESP}
+	echo "${COMMENT}" >> ${FIC_ESP}
+	echo "------------------------------------------------------------------------------------------------------------" >> ${FIC_ESP}
+	echo "${COMMAND}" >> ${FIC_ESP}
+	
+	${COMMAND} >> ${FIC_OUT} 2>> ${FIC_ERR}
+
+	RETURN_CODE=$?
+	echo "RETURN_CODE : ${RETURN_CODE}" >> ${FIC_ESP}
+	
+	if [ ${RETURN_CODE} -eq 0 ]
+	then
+		echo "     ${COMMENT} OK" >> ${FIC_ESP}
+		echo "[execute_cmd][End][`/bin/date +%H:%M:%S`]" >> ${FIC_ESP}
+		return 0
+	else
+		echo "     $ERROR_TAG ${COMMENT} NOK" >> ${FIC_ESP}
+		return ${RETURN_CODE}
+	fi
+}
+
+
+
+#------------------------------------------------------#
+#-- FUNCTION   :  on_error			    ---#
+#------------------------------------------------------#
+#-- PARAMETERS :  				    ---#
+#--	Error number	                            ---#
+#------------------------------------------------------#
+#-- RETURN:			                    ---#
+#------------------------------------------------------#
+function on_error()
+{
+	case $1 in 	
+	$LIBXML_UNPACKING_ERROR) 
+		echo
+		echo "  An error has occured : impossible to unpack libxml2 archive.See $SPY for more details" 
+	  	echo "  Make sure that libxml2 archive exists in current directory"
+		echo 
+		echo " => To report any problem or for help, please contact paradiseo-help@lists.gforge.inria.fr  and join $SPY"
+		echo 
+		kill $$;;
+
+
+	$MPICH_UNPACKING_ERROR) 
+		echo
+		echo "  An error has occured : impossible to unpack mpich2 archive.See $SPY for more details" 
+	  	echo "  Make sure that mpich2 archive exists in current directory"
+		echo 
+		echo " => To report any problem or for help, please contact paradiseo-help@lists.gforge.inria.fr  and join $SPY"
+		echo ;;
+
+	$EO_INSTALL_ERROR) 
+		echo
+		echo "  An error has occured : impossible to install Paradiseo-EO.See $SPY for more details" 
+	  	echo "If you need help, please contact paradiseo-help@lists.gforge.inria.fr and join $SPY"
+		echo 
+		echo 
+		kill $$;;
+
+	$MO_INSTALL_ERROR) 
+		echo
+		echo "  An error has occured : impossible to install Paradiseo-MO.See $SPY for more details" 
+		echo " => To report any problem or for help, please contact paradiseo-help@lists.gforge.inria.fr and join $SPY"
+		echo 
+		kill $$;;
+
+	$MOEO_INSTALL_ERROR) 
+		echo
+		echo "  An error has occured : impossible to install Paradiseo-MOEO.See $SPY for more details" 
+		echo " => To report any problem or for help, please contact paradiseo-help@lists.gforge.inria.fr and join $SPY"
+		echo 
+		kill $$;;
+
+	$PARADISEO_INSTALL_ERROR) 
+		echo
+		echo "  An error has occured : impossible to install Paradiseo-PEO.See $SPY for more details" 
+		echo '  Make sure you have the required variables in your environment (ex: by using "echo $PATH" for PATH variable) : '
+		echo '	-LD_LIBRARY_PATH=<libxml2 install path>/libxml2/lib:$LD_LIBRARY_PATH'
+		echo '	-PATH=<libxml2 install path>/libxml2/bin:<mpich2 install path>/mpich2/bin:$PATH'
+		echo
+		echo " => To report any problem or for help, please contact paradiseo-help@lists.gforge.inria.fr and join $SPY"
+		echo 
+		kill $$;;
+
+	$CHECK_AUTOTOOLS_ERROR)
+		echo
+		echo "  An error has occured : cannot find the Autotools. See $SPY for more details" 
+		echo " => To report any problem or for help, please contact paradiseo-help@lists.gforge.inria.fr and join $SPY"
+		echo 
+		kill $$;;
+	
+	$LIBXML_INSTALL_ERROR)
+		echo
+		echo "  An error has occured : impossible to install libxml2. See $SPY for more details" 
+		echo " => To report any problem or for help, please contact paradiseo-help@lists.gforge.inria.fr and join $SPY"
+		echo 
+		kill $$;;
+
+	$MPICH_INSTALL_ERROR)
+		echo
+		echo "  An error has occured : impossible to install mpich2 See $SPY for more details" 
+		echo " => To report any problem or for help, please contact paradiseo-help@lists.gforge.inria.fr and join $SPY"
+		echo 
+		kill $$;;
+
+	$PEO_CHECK_ERROR)
+		echo
+		echo " If you want to install ParadisEO-PEO, you should remove the old directories of libxml2 or mpich2 or choose another location." 
+		echo 
+		kill $$;;
+
+	$RM_PARADISEO_EO_ERROR)
+		echo
+		echo "  An error has occured : impossible to remove ParadisEO-EO. See $SPY for more details" 
+		echo " You may not have a previous ParadisEO install available in the current directory"
+		echo " => To report any problem or for help, please contact paradiseo-help@lists.gforge.inria.fr and join $SPY"
+		echo 
+		kill $$;;
+
+	$RM_UTIL_ERROR)
+		echo
+		echo "  An error has occured : impossible to remove the previous install of mpich2 and libxml2. See $SPY for more details" 
+		echo " You may not have a previous ParadisEO install available in the current directory"
+		echo " => To report any problem or for help, please contact paradiseo-help@lists.gforge.inria.fr and join $SPY"
+		echo 
+		kill $$;;
+
+	$BASIC_INSTALL_MISSING_ERROR)
+		echo
+		echo "  An error has occured : impossible to find the basic install of ParadisEO. See $SPY for more details" 
+		echo " You may not have a basic ParadisEO install available in the current directory"
+		echo " => To report any problem or for help, please contact paradiseo-help@lists.gforge.inria.fr and join $SPY"
+		echo 
+		kill $$;;
+
+	$SUCCESSFUL_STEP)
+		;;
+	*)
+		echo 
+		;;
+ 	 esac
+}
+
+#------------------------------------------------------#
+#-- FUNCTION   :  run_install_step		    ---#
+#------------------------------------------------------#
+#-- PARAMETERS :  				    ---#
+#-- 	install path	                            ---#
+#-- 	step to launch (0,1 ...)                    ---#
+#-- 	counter for loop                            ---#
+#-- Major function for install                      ---#
+#------------------------------------------------------#
+#-- RETURN: 0 if install OK                         ---#
+#------------------------------------------------------#
+
+function run_install_step()
+{
+	installKitPath=$1
+	stepToRun=$2        
+	currentStepCounter=$3
+
+	RETURN=0
+	
+	case "$stepToRun" in
+	$S_INTRODUCTION)
+		########## Introduction #########
+		clear
+		echo ""
+		echo -e ' \033[40m\033[1;33m### ParadisEO install starting .... ### \033[0m '
+		echo
+		echo "Installing the environment for ParadisEO...Note that the librairies \"libxml2\" and \"mpich2\" required for ParadisEO are provided with this package. To avoid build and test reports to be sent to our repository, please stop the program and restart it using the --skipdart option."
+		sleep 6	
+		echo
+		echo
+		return $SUCCESSFUL_STEP
+		;;
+
+	$S_UNPACK_LIBXML)
+		########## unpacking libxml2 ##########
+		echo -e  "	\033[40m\033[1;34m# STEP $currentStepCounter \033[0m "
+		echo '		--> Unpacking libxml2 (required for ParadisEO) ...'
+		
+		execute_cmd "rm -Rf $installKitPath/$LIBXML2_ARCHIVE_SUFFIX" "[$currentStepCounter-1] Remove potential existing dir $installKitPath/$LIBXML2_ARCHIVE"  $SPY 
+		RETURN=$?
+
+		execute_cmd "tar xvjf $resourceKitPath/$LIBS_PATH/$LIBXML2_ARCHIVE$LIBXML2_ARCHIVE_SUFFIX  --directory $installKitPath" "[$currentStepCounter-2] Unpack Libxml2" $SPY
+		if [ ! "$?" = "0" ]
+		then
+			echo ''
+			echo "		--> Error when unpacking libxml2"
+			echo -e ' \033[40m\033[1;33m### END ### \033[0m '
+			return $LIBXML_UNPACKING_ERROR
+		else
+			echo -e "	\033[40m\033[1;34m# STEP $currentStepCounter OK \033[0m"
+			echo
+			return $SUCCESSFUL_STEP
+		fi 
+		;;
+
+	$S_UNPACK_MPICH)
+		########## unpacking mpich2 ##########
+		echo -e  "	\033[40m\033[1;34m# STEP $currentStepCounter \033[0m "
+		echo '		--> Unpacking mpich2 (required for ParadisEO) ...'
+		
+		execute_cmd "rm -Rf $installKitPath/$MPICH2_ARCHIVE" "[$currentStepCounter-1] Remove potential existing dir $installKitPath/$MPICH2_ARCHIVE"  $SPY 
+		RETURN=$?
+
+		execute_cmd "tar xzvf $resourceKitPath/$LIBS_PATH/$MPICH2_ARCHIVE$MPICH2_ARCHIVE_SUFFIX --directory $installKitPath" "[$currentStepCounter-2] Unpack Mpich2" $SPY
+		if [ ! "$?" = "0" ]
+		then
+			echo ''
+			echo "		--> Error when unpacking mpich2"
+			echo -e ' \033[40m\033[1;33m### END ### \033[0m '
+			return $MPICH_UNPACKING_ERROR
+		else
+			echo -e "	\033[40m\033[1;34m# STEP $currentStepCounter OK \033[0m"
+			echo
+			return $SUCCESSFUL_STEP
+		fi 
+		;;
+
+
+	$S_INSTALL_EO)
+		########## installing paradiseo-eo ##########
+		echo -e  "	\033[40m\033[1;34m# STEP $currentStepCounter \033[0m "
+		echo '		--> Installing Paradiseo-EO. Please wait ...'
+
+		if [ ! "$installKitPath" = "$resourceKitPath" ]
+		    then
+		    cp  -Rf $resourceKitPath/paradiseo-eo/ $installKitPath/
+		    rm -Rf $installKitPath/paradiseo-eo/build
+		fi
+
+		execute_cmd "mkdir $installKitPath/paradiseo-eo/build" "[$currentStepCounter-1] Create build directory"  $SPY 	
+		
+		execute_cmd "cd $installKitPath/paradiseo-eo/build" "[$currentStepCounter-2] Go in Paradiseo-EO build dir"  $SPY 
+		RETURN=`expr $RETURN + $?`
+		
+		execute_cmd " echo \"cmake ../  -G$BUILD_PROCESS_TYPE $OPTIONNAL_CMAKE_FLAGS\" " "[$currentStepCounter-3] Run CMake using generator $BUILD_PROCESS_TYPE"  $SPY
+		
+		cmake ../  -G"$BUILD_PROCESS_TYPE"  -DCMAKE_BUILD_TYPE=$BUILD_TYPE $OPTIONNAL_CMAKE_FLAGS >> ${SPY} 2>> ${SPY}
+		RETURN=`expr $RETURN + $?`
+
+		if [ "$COMPILE_PARADISEO" = "1" ] 
+		then
+			execute_cmd "ctest $CTEST_CONFIG" "[$currentStepCounter-4] Compile ParadisEO-EO using CTest"  $SPY
+			LAST_RETURN=$?
+			# don't consider a submission error as a "right error"
+			if [ ! "$LAST_RETURN" = "$DART_SUBMISSION_ERROR" ]
+			then
+				RETURN=`expr $RETURN + $LAST_RETURN`
+			fi			
+		fi
+				
+		if [ ! $(($RETURN)) = 0 ]
+		then
+			echo ''
+			echo "		--> Error when installing Paradiseo-EO"
+			echo -e ' \033[40m\033[1;33m### END ### \033[0m '
+			return $EO_INSTALL_ERROR
+		else
+			echo -e "	\033[40m\033[1;34m# STEP $currentStepCounter OK \033[0m"
+			echo 
+			return $SUCCESSFUL_STEP
+		fi 
+		;;
+	$S_INSTALL_MO)
+		##########  installing paradiseo-mo ##########
+		echo -e  "	\033[40m\033[1;34m# STEP $currentStepCounter \033[0m "
+		echo '		--> Installing Paradiseo-MO. Please wait ...'
+	
+		if [ ! "$installKitPath" = "$resourceKitPath" ]
+		    then
+		    cp  -Rf $resourceKitPath/paradiseo-mo/ $installKitPath/
+		    cp $resourceKitPath/install.cmake $installKitPath/
+		    rm -Rf $installKitPath/paradiseo-mo/build/*
+		fi
+
+		execute_cmd "cd $installKitPath/paradiseo-mo/build" "[$currentStepCounter-1] Go in Paradiseo-MO dir"  $SPY 
+		RETURN=$?
+		
+		execute_cmd " echo \"cmake ../ -Dconfig=$installKitPath/$CMAKE_PRIMARY_CONFIG_FILE -G\"$BUILD_PROCESS_TYPE\" $OPTIONNAL_CMAKE_FLAGS -DCMAKE_BUILD_TYPE=$BUILD_TYPE\" " "[$currentStepCounter-2] Run CMake using generator $BUILD_PROCESS_TYPE -Dconfig=$installKitPath/$CMAKE_PRIMARY_CONFIG_FILE"  $SPY
+		cmake ../ -Dconfig=$installKitPath/$CMAKE_PRIMARY_CONFIG_FILE -G"$BUILD_PROCESS_TYPE" -DCMAKE_BUILD_TYPE=$BUILD_TYPE $OPTIONNAL_CMAKE_FLAGS>> ${SPY} 2>> ${SPY}
+		RETURN=`expr $RETURN + $?`
+		
+		if [ "$COMPILE_PARADISEO" = "1" ] 
+		then
+			execute_cmd "ctest $CTEST_CONFIG" "[$currentStepCounter-3] Compile ParadisEO-MO using CTest"  $SPY	
+			LAST_RETURN=$?
+			# don't consider a submission error as a "right error"
+			if [ ! "$LAST_RETURN" = "$DART_SUBMISSION_ERROR" ]
+			then
+				RETURN=`expr $RETURN + $LAST_RETURN`
+			fi			
+			
+			execute_cmd "make install" "[$currentStepCounter-4] Make install of ParadisEO-MO"  $SPY
+			RETURN=`expr $RETURN + $?`
+		fi
+		
+		if [ ! $(($RETURN)) = 0 ]
+		then
+			echo ''
+			echo "		--> Error when installing Paradiseo-MO"
+			echo -e ' \033[40m\033[1;33m### END ### \033[0m '
+			return $MO_INSTALL_ERROR
+		else
+			echo -e "	\033[40m\033[1;34m# STEP $currentStepCounter OK \033[0m"
+			echo
+			return $SUCCESSFUL_STEP
+		fi 
+		;;
+	$S_INSTALL_MOEO)
+		########## installing MOEO ##########
+		echo -e  "	\033[40m\033[1;34m# STEP $currentStepCounter \033[0m "
+		echo '		--> Installing Paradiseo-MOEO. Please wait ...'
+		
+		if [ ! "$installKitPath" = "$resourceKitPath" ]
+		    then
+		    cp  -Rf $resourceKitPath/paradiseo-moeo/ $installKitPath/
+		    rm -Rf $installKitPath/paradiseo-moeo/build/*
+		fi
+
+		execute_cmd "cd $installKitPath/paradiseo-moeo/build" "[$currentStepCounter-1] Go in Paradiseo-MOEO dir"  $SPY 
+		RETURN=$?
+		
+		execute_cmd " echo \"cmake ../ -Dconfig=$installKitPath/$CMAKE_PRIMARY_CONFIG_FILE -G\"$BUILD_PROCESS_TYPE\" -DCMAKE_BUILD_TYPE=$BUILD_TYPE $OPTIONNAL_CMAKE_FLAGS \"" "[$currentStepCounter-2] Run CMake using generator $BUILD_PROCESS_TYPE -Dconfig=$installKitPath/$CMAKE_PRIMARY_CONFIG_FILE"  $SPY
+		cmake ../ -Dconfig=$installKitPath/$CMAKE_PRIMARY_CONFIG_FILE -G"$BUILD_PROCESS_TYPE" -DCMAKE_BUILD_TYPE=$BUILD_TYPE $OPTIONNAL_CMAKE_FLAGS >> ${SPY} 2>> ${SPY}
+		RETURN=`expr $RETURN + $?`		
+		
+		if [ "$COMPILE_PARADISEO" = "1" ] 
+		then
+			execute_cmd "ctest $CTEST_CONFIG" "[$currentStepCounter-3] Compile ParadisEO-MOEO using CTest"  $SPY
+			LAST_RETURN=$?
+			# don't consider a submission error as a "right error"
+			if [ ! "$LAST_RETURN" = "$DART_SUBMISSION_ERROR" ]
+			then
+				RETURN=`expr $RETURN + $LAST_RETURN`
+			fi	
+			execute_cmd "make install" "[$currentStepCounter-4] Make install ParadisEO-MOEO"  $SPY
+			RETURN=`expr $RETURN + $?`
+		fi
+		
+		# Make link  with the install.cmake (at the top level)
+		#execute_cmd "ln -s $installKitPath/install.cmake $installKitPath/paradiseo-moeo/install.cmake" "[$currentStepCounter-5] Create link to install.cmake for MOEO"  $SPY 
+		
+		if [ ! $(($RETURN)) = 0 ]
+		then
+			echo ''
+			echo "		--> Error when installing Paradiseo-MOEO"
+			echo -e ' \033[40m\033[1;33m### END ### \033[0m '
+			return $MOEO_INSTALL_ERROR
+		else
+			echo -e "	\033[40m\033[1;34m# STEP $currentStepCounter OK \033[0m"
+			echo
+			return $SUCCESSFUL_STEP
+		fi 
+		;;
+		
+	$S_CHECK_AUTOTOOLS)
+		########## Check if we can user Autogen & Autoconf (only for libxml2 & mpich2 installation) ##########
+		echo -e  "	\033[40m\033[1;34m# STEP $currentStepCounter \033[0m "
+		echo '		--> Looking for the Autotools (Autogen & Autoconf, required to install libxml2 and mpich2)'
+		
+		(autoconf --version) < /dev/null > /dev/null 2>&1 ||
+		{
+			echo ''
+			echo "		--> Error when checking for Autoconf"
+		    echo "		You must have Autoconf installed to compile $PROG. Please update your system to get it before installing $PROG."
+		    execute_cmd "autoconf --version" "[$currentStepCounter-1] Check Autoconf" $SPY    
+		   	echo -e ' \033[40m\033[1;33m### END ### \033[0m '
+		    return $CHECK_AUTOTOOLS_ERROR
+		}
+		
+		(automake --version) < /dev/null > /dev/null 2>&1 ||
+		{
+			echo ''
+			echo "		--> Error when checking for Automake"
+		    echo "		You must have Automake installed to compile $PROG. Please update your system to get it before installing $PROG."
+		    execute_cmd "automake --version" "[$currentStepCounter-2] Check Automake" $SPY 
+		    echo -e ' \033[40m\033[1;33m### END ### \033[0m '
+		    return $CHECK_AUTOTOOLS_ERROR
+		}
+	
+		echo -e "	\033[40m\033[1;34m# STEP $currentStepCounter OK \033[0m"
+		echo
+		return $SUCCESSFUL_STEP
+		;;
+		
+	$S_INSTALL_LIBXML)
+		########## installing LIBXML2 ##########
+		echo -e  "	\033[40m\033[1;34m# STEP $currentStepCounter \033[0m "
+		echo '		--> Installing libxml2. Please wait ...'
+		
+		execute_cmd "rm -Rf $installKitPath/libxml2" "[$currentStepCounter-0] Remove potential existing dir $installKitPath/libxml2"  $SPY 
+		RETURN=$?
+
+		execute_cmd "mkdir $installKitPath/libxml2" "[$currentStepCounter-1] Create libxml2 dir"  $SPY 
+		RETURN=$?
+		execute_cmd "cd $installKitPath/libxml2-2.6.0/" "[$currentStepCounter-2] Go in libxml2-2.6.0 dir"  $SPY
+		RETURN=`expr $RETURN + $?`
+		execute_cmd "./configure --prefix=$installKitPath/libxml2/ --exec-prefix=$installKitPath/libxml2/" "[$currentStepCounter-3] Run configure for libxml2"  $SPY
+		RETURN=`expr $RETURN + $?`
+		execute_cmd "make" "[$currentStepCounter-4] Compile libxml2"  $SPY
+		RETURN=`expr $RETURN + $?`
+		execute_cmd "make install" "[$currentStepCounter-5] Run install libxml2 "  $SPY
+		RETURN=`expr $RETURN + $?`
+		if [ ! $(($RETURN)) = 0 ]
+		then
+			echo ''
+			echo "		--> Error when installing libxml2"
+			echo -e ' \033[40m\033[1;33m### END ### \033[0m '
+			return $LIBXML_INSTALL_ERROR
+		else
+			echo -e "	\033[40m\033[1;34m# STEP $currentStepCounter OK \033[0m"
+			echo
+			return $SUCCESSFUL_STEP
+		fi 
+		;;
+	$S_INSTALL_MPICH)
+		########## installing MPICH2 ##########
+		echo -e  "	\033[40m\033[1;34m# STEP $currentStepCounter \033[0m "
+		echo '		--> Installing mpich2. Please wait ...'
+		
+		execute_cmd "rm -Rf $installKitPath/mpich2" "[$currentStepCounter-0] Remove potential existing dir $installKitPath/mpich2"  $SPY 
+		RETURN=$?
+
+		execute_cmd "mkdir $installKitPath/mpich2" "[$currentStepCounter-1] Create mpich2 dir"  $SPY 
+		RETURN=$?
+		execute_cmd "cd $installKitPath/mpich2-1.0.3/" "[$currentStepCounter-2] Go in mpich2-1.0.3 dir"  $SPY
+		RETURN=`expr $RETURN + $?`
+		execute_cmd "./configure --prefix=$installKitPath/mpich2/" "[$currentStepCounter-3] Run configure for mpich2"  $SPY
+		RETURN=`expr $RETURN + $?`
+		execute_cmd "make" "[$currentStepCounter-4] Compile mpich2"  $SPY
+		RETURN=`expr $RETURN + $?`
+		execute_cmd "make install" "[$currentStepCounter-5] Run install mpich2 "  $SPY
+		RETURN=`expr $RETURN + $?`
+		if [ ! $(($RETURN)) = 0 ]
+		then
+			echo ''
+			echo "		--> Error when installing MPICH2"
+			echo -e ' \033[40m\033[1;33m### END ### \033[0m '
+			return $MPICH_INSTALL_ERROR
+		else
+			echo -e "	\033[40m\033[1;34m# STEP $currentStepCounter OK \033[0m"
+			echo
+			return $SUCCESSFUL_STEP
+		fi 
+		;;
+	$S_REMOVE_TEMP_LIBXML)
+		########## removing temp directory for libxml ##########
+		echo -e  "	\033[40m\033[1;34m# STEP $currentStepCounter \033[0m "
+		echo '		--> Removing libxml2 temp install directory ...'
+		
+		execute_cmd "rm -fr $installKitPath/libxml2-2.6.0" "[$currentStepCounter] Remove Libxml2 temporary directory" $SPY
+		if [ ! "$?" = "0" ]
+		then
+			echo ''
+			echo "		--> Error when removing $installKitPath/libxml2-2.6.0"
+			echo -e ' \033[40m\033[1;33m### END ### \033[0m '
+			return $REMOVE_TEMP_DIRECTORY_ERROR
+		else
+			echo -e "	\033[40m\033[1;34m# STEP $currentStepCounter OK \033[0m"
+			echo
+			return $SUCCESSFUL_STEP
+		fi 
+		;;
+
+	$S_REMOVE_TEMP_MPICH)
+		########## removing temp directory for mpich ##########
+		echo -e  "	\033[40m\033[1;34m# STEP $currentStepCounter \033[0m "
+		echo '		--> Removing mpich2 temp install directory ...'
+		
+		execute_cmd "rm -fr $installKitPath/mpich2-1.0.3" "[$currentStepCounter] Remove Mpich2 temporary directory" $SPY
+		if [ ! "$?" = "0" ]
+		then
+			echo ''
+			echo "		--> Error when removing $installKitPath/mpich2-1.0.3"
+			echo -e ' \033[40m\033[1;33m### END ### \033[0m '
+			return $REMOVE_TEMP_DIRECTORY_ERROR
+		else
+			echo -e "	\033[40m\033[1;34m# STEP $currentStepCounter OK \033[0m"
+			echo
+			return $SUCCESSFUL_STEP
+		fi 
+		;;
+
+	$S_REMOVE_INSTALL)
+		########## removing a previous install of EO ##########
+		echo -e  "	\033[40m\033[1;34m# STEP $currentStepCounter \033[0m "
+		echo '		--> Removing your previous install of ParadisEO ...'
+	
+	
+		if [ -d "$installKitPath/mpich2" ]
+		then
+			execute_cmd "rm -r $installKitPath/mpich2" "[$currentStepCounter] Remove previous install of mpich2" $SPY 
+		fi
+		idx=$?
+
+		if [ -d "$installKitPath/libxml2" ]
+		then
+			execute_cmd "rm -r $installKitPath/libxml2" "[$currentStepCounter] Remove previous install of libxml2" $SPY 
+		fi
+		idx=`expr $idx + $?`
+
+		execute_cmd "rm -Rf $installKitPath/paradiseo-eo/build/*" "[$currentStepCounter] Remove $installKitPath/paradiseo-eo/build/*" $SPY 
+		idx=`expr $idx + $?`
+		execute_cmd "rm -Rf $installKitPath/paradiseo-mo/build/*" "[$currentStepCounter] Remove $installKitPath/paradiseo-mo/build/*" $SPY 
+		idx=`expr $idx + $?`
+		execute_cmd "rm -Rf $installKitPath/paradiseo-moeo/build/*" "[$currentStepCounter] Remove $installKitPath/paradiseo-moeo/build/*" $SPY 
+		idx=`expr $idx + $?`
+		execute_cmd "rm -Rf $installKitPath/paradiseo-peo/build/*" "[$currentStepCounter] Remove $installKitPath/paradiseo-peo/build/*" $SPY 
+		idx=`expr $idx + $?`
+		
+		if [ ! $(($idx)) = 0 ]
+		then
+			echo ''
+			echo "		--> Error when removing previous install of ParadisEO"
+			echo -e ' \033[40m\033[1;33m### END ### \033[0m '
+			return $RM_UTIL_ERROR
+		else
+			echo -e "	\033[40m\033[1;34m# STEP $currentStepCounter OK \033[0m"
+			echo
+			return $SUCCESSFUL_STEP
+		fi 
+		;;
+
+	$S_CONFIGURE_MPICH_ENV)
+		########## Configuring mpich environment variables ##########
+		echo -e  "	\033[40m\033[1;34m# STEP $currentStepCounter \033[0m "
+		echo '		--> Configuring environment variables for mpich2 ...'
+
+		execute_cmd "export PATH=$PATH:`xml2-config --prefix`/bin:$installKitPath/mpich2/bin" "[$currentStepCounter-2] Export PATH variable" $SPY 
+		idx=$?	
+
+		execute_cmd "echo export PATH=$PATH:$installKitPath/mpich2/bin" "[$currentStepCounter-4] Export PATH variable into env" $SPY $HOME/.bashrc
+		idx=`expr $idx + $?`
+
+		execute_cmd "source $HOME/.bashrc" "[$currentStepCounter-5] Export variables for mpich2" $SPY
+		idx=`expr $idx + $?`
+
+		if [ ! $(($idx)) = 0 ]
+		then
+			echo ''
+			echo "		--> Error when configuring environment variables for mpich2"
+			echo -e ' \033[40m\033[1;33m### END ### \033[0m '
+			return $VAR_CONFIG_ERROR
+		else
+			echo -e "	\033[40m\033[1;34m# STEP $currentStepCounter OK \033[0m"
+			echo
+			return $SUCCESSFUL_STEP
+		fi 
+		;;
+
+	$S_CONFIGURE_LIBXML2_ENV)
+		########## Configuring environment variables ##########
+		echo -e  "	\033[40m\033[1;34m# STEP $currentStepCounter \033[0m "
+		echo '		--> Configuring environment variables for libxml2 ...'
+		
+		execute_cmd "XML2_CONFIG=\`xml2-config --prefix\`" "[$currentStepCounter-1] Run xml2-config variable" $SPY
+		idx=$?
+		echo "******** $XML2_CONFIG *********"
+
+		execute_cmd "export LD_LIBRARY_PATH=`xml2-config --prefix`/lib:" "[$currentStepCounter-2] Export LD_LIBRARY_PATH variable" $SPY
+		idx=$?	 
+		
+		execute_cmd "echo export LD_LIBRARY_PATH=$`xml2-config --prefix`/lib" "[$currentStepCounter-3] Export LD_LIBRARY_PATH variable into env" $SPY $HOME/.bashrc
+		idx=$?	 
+
+		execute_cmd "echo export PATH=$PATH:`xml2-config --prefix`/bin" "[$currentStepCounter-4] Export PATH variable into env" $SPY $HOME/.bashrc
+		idx=`expr $idx + $?`
+
+		execute_cmd "source $HOME/.bashrc" "[$currentStepCounter-5] Export variables for libxml2" $SPY
+		idx=`expr $idx + $?`
+
+		if [ ! $(($idx)) = 0 ]
+		then
+			echo ''
+			echo "		--> Error when configuring environment variables for libxml2"
+			echo -e ' \033[40m\033[1;33m### END ### \033[0m '
+			return $VAR_CONFIG_ERROR
+		else
+			echo -e "	\033[40m\033[1;34m# STEP $currentStepCounter OK \033[0m"
+			echo
+			return $SUCCESSFUL_STEP
+		fi 
+		;;
+	$S_CONFIGURE_ENV)
+		########## Configuring environment variables ##########
+		echo -e  "	\033[40m\033[1;34m# STEP $currentStepCounter \033[0m "
+		echo '		--> Configuring environment variables for libxml2 and mpich2 ...'
+		
+		execute_cmd "export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$installKitPath/libxml2/lib:" "[$currentStepCounter-1] Export LD_LIBRARY_PATH variable" $SPY
+		idx=$?	 
+		execute_cmd "export PATH=$PATH:$installKitPath/libxml2/bin:$installKitPath/mpich2/bin" "[$currentStepCounter-2] Export PATH variable" $SPY 
+	
+		execute_cmd "echo export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$installKitPath/libxml2/lib" "[$currentStepCounter-3] Export LD_LIBRARY_PATH variable into env" $SPY $HOME/.bashrc
+		idx=$?	 
+
+		execute_cmd "echo export PATH=$PATH:$installKitPath/libxml2/bin:$installKitPath/mpich2/bin" "[$currentStepCounter-4] Export PATH variable into env" $SPY $HOME/.bashrc
+		idx=`expr $idx + $?`
+
+		execute_cmd "source $HOME/.bashrc" "[$currentStepCounter-5] Export variables" $SPY
+		idx=`expr $idx + $?`
+
+		if [ ! $(($idx)) = 0 ]
+		then
+			echo ''
+			echo "		--> Error when configuring environment variables for libxml2 and mpich2"
+			echo -e ' \033[40m\033[1;33m### END ### \033[0m '
+			return $VAR_CONFIG_ERROR
+		else
+			echo -e "	\033[40m\033[1;34m# STEP $currentStepCounter OK \033[0m"
+			echo
+			return $SUCCESSFUL_STEP
+		fi 
+		;;
+	$S_INSTALL_PEO)
+		######## installing paradiseo-peo ##########
+		echo -e  "	\033[40m\033[1;34m# STEP $currentStepCounter \033[0m "
+		echo '		--> Installing Paradiseo-PEO. Please wait ...'
+		
+		if [ ! "$installKitPath" = "$resourceKitPath" ]
+		    then
+		    cp  -Rf $resourceKitPath/paradiseo-peo/ $installKitPath/
+		    rm -Rf $installKitPath/paradiseo-peo/build/*
+		fi
+
+		execute_cmd "cd $installKitPath/paradiseo-peo/build" "[$currentStepCounter-1] Go in Paradiseo-PEO dir"  $SPY 
+		RETURN=$?
+
+		execute_cmd " echo \"cmake ../  -Dconfig=$installKitPath/$CMAKE_PRIMARY_CONFIG_FILE -G\"$BUILD_PROCESS_TYPE\" $OPTIONNAL_CMAKE_FLAGS \"" "[$currentStepCounter-2] Run CMake using generator $BUILD_PROCESS_TYPE -Dconfig=$installKitPath/$CMAKE_PRIMARY_CONFIG_FILE"  $SPY
+		cmake ../  -Dconfig=$installKitPath/$CMAKE_PRIMARY_CONFIG_FILE -G"$BUILD_PROCESS_TYPE" $OPTIONNAL_CMAKE_FLAGS -DCMAKE_BUILD_TYPE=$BUILD_TYPE >> ${SPY} 2>> ${SPY}
+		RETURN=`expr $RETURN + $?`
+		
+		if [ "$COMPILE_PARADISEO" = "1" ] 
+		then
+			execute_cmd "ctest $CTEST_CONFIG" "[$currentStepCounter-3] Compile ParadisEO-PEO using CTest"  $SPY
+			LAST_RETURN=$?
+			# don't consider a submission error as a "right error"
+			if [ ! "$LAST_RETURN" = "$DART_SUBMISSION_ERROR" ]
+			then
+				RETURN=`expr $RETURN + $LAST_RETURN`
+			fi	
+			execute_cmd "make install" "[$currentStepCounter-4] Make install ParadisEO-PEO "  $SPY
+			RETURN=`expr $RETURN + $?`
+		fi
+		
+		# Make link  with the install.cmake (at the top level)
+		#execute_cmd "ln -s $installKitPath/install.cmake $installKitPath/paradiseo-peo/install.cmake" "[$currentStepCounter-5] Create link to install.cmake for PEO"  $SPY 
+		
+		if [ ! $(($RETURN)) = 0 ]
+		then
+			echo ''
+			echo "		--> Error when installing Paradiseo-PEO"
+			echo -e ' \033[40m\033[1;33m### END ### \033[0m '
+			return $PARADISEO_INSTALL_ERROR
+		else
+			echo -e "	\033[40m\033[1;34m# STEP $currentStepCounter OK \033[0m"
+			echo
+			return $SUCCESSFUL_STEP
+		fi 
+		;;
+
+	$S_CONFIGURE_MPD)
+		######## copy .mpd.conf file in your HOME directory or in /etc if you are root (required for mpich2) 
+		echo -e  "	\033[40m\033[1;34m# STEP $currentStepCounter \033[0m "
+		echo '		--> Copy .mpd.conf file in your HOME directory or in /etc if you are root (required for mpich2)  ...'
+		if [ "$UID" = "0" ]
+		then
+			execute_cmd "cp $resourceKitPath/.mpd.conf /etc" "[$currentStepCounter-1] Copy mpd.conf file in /etc (root)" $SPY
+			RETURN=$?
+			execute_cmd "mv /etc/.mpd.conf /etc/mpd.conf" "[$currentStepCounter-2] Move .mpd.conf to mpd.conf" $SPY
+			RETURN=`expr $RETURN + $?`
+			execute_cmd "chmod 600 /etc/mpd.conf" "[$currentStepCounter-3] Change .mpd.conf rights" $SPY
+			RETURN=`expr $RETURN + $?`
+		else
+			execute_cmd "cp $resourceKitPath/.mpd.conf $HOME" "[$currentStepCounter-1] Copy mpd.conf file in in your HOME directory" $SPY
+			RETURN=$?
+			execute_cmd "chmod 600 $HOME/.mpd.conf" "[$currentStepCounter-2] Change .mpd.conf rights" $SPY
+			RETURN=`expr $RETURN + $?`
+		fi
+		if [ ! $(($RETURN)) = 0 ]
+		then
+			echo ''
+			echo "		--> Error when copying .mpd.conf file "
+			echo -e ' \033[40m\033[1;33m### END ### \033[0m '
+			return $MPD_COPY_ERROR
+		else
+			echo -e "	\033[40m\033[1;34m# STEP $currentStepCounter OK \033[0m"
+			echo
+			return $SUCCESSFUL_STEP
+		fi 	
+		;;
+
+	$S_PEO_CHECK)
+		if [ -d paradiseo-eo -a -d paradiseo-mo -a -d paradiseo-moeo ]
+		then
+			if  [ -d libxml2 -o -d mpich2 ]
+			then
+				echo 
+				echo "A previous installation of ParadisEO-PEO may exist because libxml2 or mpich2 directory have been detected in $installKitPath."
+				echo -e " \033[40m\033[1;33m	=> Do you want to remove these directories for a new installation ? If you choose NO, the installation will stop. (y/n) ? \033[0m "
+				read ANSWER
+				if [ "$ANSWER" = "y" ]
+				then
+					execute_cmd "rm -rf $installKitPath/libxml2 $installKitPath/mpich2" "[$currentStepCounter] Remove libxml2 ans mpich2 directories for a new install" $SPY "/dev/null" "/dev/null"
+				else
+					return $PEO_CHECK_ERROR
+				fi
+			fi 
+		else			
+			echo 
+			echo "Basic install not found (at least one of the EO,MO,MOEO components is missing) in $installKitPath."
+			
+			execute_cmd "test -d paradiseo-eo" "[$currentStepCounter-1] Check previous basic install" $SPY
+			execute_cmd "test -d paradiseo-mo" "[$currentStepCounter-2] Check previous basic install" $SPY
+			execute_cmd "test -d paradiseo-moeo" "[$currentStepCounter-3] Check previous basic install" $SPY
+
+			echo ''
+			echo "		--> Error when searching for a previous basic install in $installKitPath."
+			echo -e ' \033[40m\033[1;33m### END ### \033[0m '
+			return $BASIC_INSTALL_MISSING_ERROR	
+		fi
+		;;
+	$S_END_WITHOUT_INFO)
+		echo
+		echo -e "	\033[40m\033[1;34m#  SUCCESSFULL INSTALLATION. \033[0m"
+		echo
+		return $SUCCESSFUL_STEP
+		;;
+	$S_END)
+		echo -e "The file \".bashrc\" file located in your directory $HOME has been MODIFIED. The following variables have been modified at the end:"
+		echo -e " LD_LIBRARY_PATH=\$LD_LIBRARY_PATH:$installKitPath/libxml2/lib: "
+		echo -e " PATH=\$PATH:$installKitPath/libxml2/bin:$installKitPath/mpich2/bin"
+		echo -e "These variables are necessary to compile any program using ParadisEO-PEO.\033[40m\033[1;33m If you want to keep them in your environment in order not to have to set them each time you compile, enter  \"source $HOME/.bashrc\" \033[0m. If you don't want to use these variables, please remove them from $HOME/.bashrc."
+		sleep 2
+		echo
+		echo
+		echo -e "	\033[40m\033[1;34m#  SUCCESSFULL INSTALLATION. \033[0m"
+		echo
+		return $SUCCESSFUL_STEP
+		;;
+	*)
+		
+	;;
+	esac
+}
+
+
+#------------------------------------------------------#
+#-- FUNCTION   :  check_utils_install		    ---#
+#------------------------------------------------------#
+#-- PARAMETERS : No 				    ---#	
+#-- Set some global variables (used for libxml2     ---#
+#-- and mpich2 install management)                  ---#
+#------------------------------------------------------#
+function check_utils_install
+{
+	# is there an available version of mpich on the system ?
+	(mpicxx --version) < /dev/null > /dev/null 2>&1 ||
+	{
+	IS_MPICH_INSTALLED=0
+	}
+	
+	# is there an available version of libxml2 on the system ?
+	(xml2-config --version) < /dev/null > /dev/null 2>&1 ||
+	{
+	IS_LIBXML2_INSTALLED=0
+	}
+	
+	# ask the user if he'd like to keep his mpich version instead of the provided one
+	if [ "$IS_MPICH_INSTALLED" = "1" ]
+	then
+		echo 
+		echo -e ' \033[40m\033[1;31m###  A version of the MPI compiler has been detected on your system. Do you want to use it (if no, the mpich2 package, provided with ParadisEO, will be installed on your computer) [y/n] \033[0m '
+	
+		execute_cmd "echo \" A version of the MPI compiler has been detected on the system\"" "Is there a previous install of MPI ?" $SPY
+	
+		TREATENED=0
+		while [ "$TREATENED" = "0" ]
+		do
+			read MPICH_YES_NO
+			if  [ ! "$MPICH_YES_NO" = "y" ] && [ ! "$MPICH_YES_NO" = "n" ] 
+			then
+				TREATENED=0
+			else
+				if [ "$MPICH_YES_NO" = "y" ] 
+				then
+					USE_EXISTING_MPICH=1
+				else
+					USE_EXISTING_MPICH=0
+				fi	
+				TREATENED=1
+			fi
+		done
+	fi
+	
+	
+	# ask the user if he'd like to keep his libxml2 version instead of the provided one
+	if [ "$IS_LIBXML2_INSTALLED" = "1" ]
+	then
+		echo 
+		echo -e ' \033[40m\033[1;31m###  A version of libxml2 has been detected on your system. Do you want to use it (if no, the libxml2 package, provided with ParadisEO, will be installed on your computer) [y/n] \033[0m '
+	
+		execute_cmd "echo \" A version of libxml2 has been detected on the system\"" "Is there a previous install of libxml2 ?" $SPY
+	
+		TREATENED=0
+		while [ "$TREATENED" = "0" ]
+		do
+			read LIBXML2_YES_NO
+			if [ ! "$LIBXML2_YES_NO" = "y" ] && [ ! "$LIBXML2_YES_NO" = "n" ] 
+			then
+				TREATENED=0
+			else
+				if [ "$LIBXML2_YES_NO" = "y" ] 
+				then
+					USE_EXISTING_LIBXML2=1
+				else
+					USE_EXISTING_LIBXML2=0
+				fi	
+				TREATENED=1
+			fi
+		done
+	fi
+
+}
+
+
+
+########################################################
+######### 		BODY 							########
+#########################################################
+
+
+(cmake --version) < /dev/null > /dev/null 2>&1 ||
+{
+    echo "You must have CMake installed to compile $PROG. Please update your system to get it before installing $PROG."
+    execute_cmd "echo \"You must have CMake installed to compile $PROG. Please update your system to get it before installing $PROG.\"" "[0-3] Check autoconf" $SPY 
+    DIE=1
+}
+
+if [ "$DIE" = "1" ] 
+then
+    exit 1
+fi
+
+
+
+########################################################################
+# Simple menu
+# The options are :
+#  --prefix
+#  --debug
+#  --skipdart
+#  --help
+#######################################################################
+
+INSTALL_TREATENED=0
+INSTALL_PATH=$PWD
+for i in $*
+do
+  if [ "${i%=*}" = "--help" ] || [ "${i%=*}" = "-h" ]
+  then
+  		clear
+  		echo "installParadiseo.sh"
+		echo
+		echo -e "\033[1mNAME\033[0m"
+		echo '	installParadiseo.sh  - Install ParadisEO'
+		echo
+		echo -e "\033[1mSYNOPSIS\033[0m"
+		echo -e '	\033[1m./installParadiseo.sh\033[0m  or \033[1mbash installParadiseo.sh\033[0m'
+		echo -e '	[\033[1m--prefix=\033[0m\033[4mPATH\033[0m] [\033[1m--debug\033[0m] [\033[1m--skipdart\033[0m] [\033[1m--home=\033[0m\033[4mHOME\033[0m] [\033[1m-h\033[0m] [\033[1m--help\033[0m]'
+		echo
+		echo -e "\033[1mDESCRIPTION\033[0m"
+		echo -e "	\033[1m--prefix=\033[0m\033[4mPATH\033[0m"
+		echo -e "		ParadisEO will be installed in the directory \033[0m\033[4mPATH\033[0m. The current directory is used by default."
+		echo
+		echo -e "	\033[1m--debug\033[0m"
+		echo '		Debug mode, set warning compiler flags and run tests.'
+		echo
+		echo -e "	\033[1m--skipdart\033[0m"
+		echo '		Use this option to avoid build/test report submission to our Dart server.'
+		echo		
+		echo -e "	\033[1m--home=\033[0m\033[4mHOME\033[0m"
+		echo -e "		Using \033[0m\033[4mHOME\033[0m as your home directory. Should be used when ~ doesnt reference your home. "
+		echo			
+		echo -e "	\033[1m-h, --help\033[0m"
+		echo '		Print these useful lines.'
+		echo	
+		echo -e "\033[1mAUTHOR\033[0m"
+		echo  "	Written by Thomas Legrand."
+		echo
+		echo -e "\033[1mBUGS\033[0m"
+		echo  "	Report bugs to paradiseo-bugs@lists.gforge.inria.fr."
+		echo
+		echo -e "\033[1mCOPYRIGHT\033[0m"
+		echo "	This software is governed by the CeCILL license under French law and"
+		echo "	abiding by the rules of distribution of free software.  You can  use,"
+		echo "	modify and/ or redistribute the software under the terms of the CeCILL"
+		echo "	license as circulated by CEA, CNRS and INRIA at the following URL"
+		echo "	http://www.cecill.info. "
+		echo
+		echo -e "\033[1mSEE ALSO\033[0m"		
+		echo  "	For further help, please contact paradiseo-help@lists.gforge.inria.fr."	
+		echo
+		exit
+  fi
+  if [ "${i%=*}" = "--prefix" ]
+   then
+      INSTALL_PATH=${i#*=}
+  fi
+  if [ "${i%=*}" = "--debug" ]
+   then
+      BUILD_TYPE=Debug
+      OPTIONNAL_CMAKE_FLAGS='-DENABLE_CMAKE_TESTING=TRUE'
+      CTEST_CONFIG="$CTEST_CONFIG -D ExperimentalTest"
+  fi
+  if [ "${i%=*}" = "--skipdart" ]
+   then
+  	  SKIP_DART="1"
+  fi
+  if [ "${i%=*}" = "--home" ]
+   then
+  	 HOME_PATH=${i#*=}
+  fi
+done
+#######################################################################
+
+### Do we have a valid home path ?
+if [ ! -d $HOME_PATH ]
+then
+	echo " Please give a valid path for your home directory (use --help for further information)"
+fi
+
+
+### Add a CTest flag depending on the "skipdart" option.
+if [ ! "$SKIP_DART" = "1" ]
+then
+  	  CTEST_CONFIG="$CTEST_CONFIG -D ExperimentalSubmit"
+fi
+  
+ 
+### Need the generator
+BUILD_PROCESS_TYPE=0
+GENERATOR_TREATENED=0
+
+while [ ! "$GENERATOR_TREATENED" = "1" ]
+do	
+	case "$BUILD_PROCESS_TYPE" in
+	
+	$P_UNIX_MAKEFILES)
+		BUILD_PROCESS_TYPE="$G_UNIX_MAKEFILES"
+		GENERATOR_TREATENED=1		
+		;;
+	
+	$P_KDEVELOP3_PROJECT)
+		BUILD_PROCESS_TYPE="$G_KDEVELOP3_PROJECT"
+		GENERATOR_TREATENED=1
+		COMPILE_PARADISEO=1
+		;;
+	
+	$P_XCODE_PROJECT)
+		BUILD_PROCESS_TYPE="$G_XCODE_PROJECT"
+		GENERATOR_TREATENED=1
+		COMPILE_PARADISEO=1
+		;;
+	*)
+		echo
+		echo -e ' \033[40m\033[1;33m### Please select the kind of "Makefile" you want to generate: ### \033[0m '
+		echo
+		echo "	 $P_UNIX_MAKEFILES : Unix Makefiles (standard Makefiles)"
+		echo "	 $P_KDEVELOP3_PROJECT : KDevelop3 project files"
+		echo "	 $P_XCODE_PROJECT : Xcode project files"
+		read BUILD_PROCESS_TYPE
+	;;
+	esac
+done
+
+
+while [ ! "$INSTALL_TREATENED" = "1" ]
+do	
+	case "$INSTALL_TYPE" in
+	$P_FULL_INSTALL)
+	
+		check_utils_install
+
+		if [ "$USE_EXISTING_MPICH" = "1" ] && [ "$USE_EXISTING_LIBXML2" = "1" ] 
+		then
+			THE_GOOD_INSTALL=$FULL_INSTALL_WITHOUT_LIBXML2_MPICH2
+		
+		elif [ "$USE_EXISTING_MPICH" = "1" ] && [ "$USE_EXISTING_LIBXML2" = "0" ] 
+		then
+			THE_GOOD_INSTALL=$FULL_INSTALL_WITHOUT_MPICH
+		
+		elif [ "$USE_EXISTING_MPICH" = "0" ] && [ "$USE_EXISTING_LIBXML2" = "1" ] 
+		then
+			THE_GOOD_INSTALL=$FULL_INSTALL_WITHOUT_LIBXML2
+		
+		elif [ "$USE_EXISTING_MPICH" = "0" ] && [ "$USE_EXISTING_LIBXML2" = "0" ] 
+		then
+			THE_GOOD_INSTALL=$FULL_INSTALL
+		else
+			THE_GOOD_INSTALL=$FULL_INSTALL
+		fi
+
+		counter=0
+		for step in $THE_GOOD_INSTALL	
+		do
+			run_install_step $INSTALL_PATH $step $counter
+			on_error $?
+			counter=`expr $counter + 1`
+		done
+		INSTALL_TREATENED=1
+		;;
+
+	$P_BASIC_INSTALL)
+		counter=0
+		for step in $BASIC_INSTALL	
+		do
+			run_install_step $INSTALL_PATH $step $counter
+			on_error $?
+			counter=`expr $counter + 1`
+		done
+		INSTALL_TREATENED=1
+		;;
+
+	$P_PARALLEL_INSTALL)	
+
+		check_utils_install
+
+		if [ "$USE_EXISTING_MPICH" = "1" ] && [ "$USE_EXISTING_LIBXML2" = "1" ] 
+		then
+			THE_GOOD_PARALLEL_INSTALL=$PARALLEL_INSTALL_WITHOUT_LIBXML2_MPICH2
+		
+		elif [ "$USE_EXISTING_MPICH" = "1" ] && [ "$USE_EXISTING_LIBXML2" = "0" ] 
+		then
+			THE_GOOD_PARALLEL_INSTALL=$PARALLEL_INSTALL_WITHOUT_MPICH2
+		
+		elif [ "$USE_EXISTING_MPICH" = "0" ] && [ "$USE_EXISTING_LIBXML2" = "1" ] 
+		then
+			THE_GOOD_PARALLEL_INSTALL=$PARALLEL_INSTALL_WITHOUT_LIBXML2
+		
+		elif [ "$USE_EXISTING_MPICH" = "0" ] && [ "$USE_EXISTING_LIBXML2" = "0" ] 
+		then
+			THE_GOOD_PARALLEL_INSTALL=$PARALLEL_INSTALL
+		else
+			THE_GOOD_PARALLEL_INSTALL=$PARALLEL_INSTALL
+		fi
+
+		counter=0
+		for step in $THE_GOOD_PARALLEL_INSTALL	
+		do
+			run_install_step $INSTALL_PATH $step $counter
+			on_error $?
+			counter=`expr $counter + 1`
+		done
+		INSTALL_TREATENED=1
+		;;
+
+	$P_RM_PREVIOUS_INSTALLL)
+		counter=0
+		for step in $RM_PREVIOUS_INSTALL	
+		do
+			run_install_step $INSTALL_PATH $step $counter
+			on_error $?
+			counter=`expr $counter + 1`
+		done
+		INSTALL_TREATENED=1
+		;;
+
+	$P_EXIT_INSTALL)
+		INSTALL_TREATENED=1
+		;;
+		
+	*)
+		echo
+		echo -e ' \033[40m\033[1;33m### Please select your install for ParadisEO : ### \033[0m '
+		echo
+		echo "	 1 : Full install (all the components : EO,MO,MOEO and PEO)"
+		echo "	 2 : Basic install: only EO,MO and MOEO components will be installed."
+		echo "	 3 : ParadisEO-PEO install. I've already installed the basic version and I want to install ParadisEO-PEO"
+		echo "	 4 : Remove a previous install of ParadisEO located in $INSTALL_PATH"
+		echo "	 5 : Exit install"
+		read INSTALL_TYPE
+	;;
+	esac
+done
+
+
+
+
diff --git a/tags/paradiseo-ix86-1.1/lib/libxml2-2.6.0.tar.bz2 b/tags/paradiseo-ix86-1.1/lib/libxml2-2.6.0.tar.bz2
new file mode 100644
index 000000000..9ff2c6f9d
Binary files /dev/null and b/tags/paradiseo-ix86-1.1/lib/libxml2-2.6.0.tar.bz2 differ
diff --git a/tags/paradiseo-ix86-1.1/lib/mpich2-1.0.3.tar.gz b/tags/paradiseo-ix86-1.1/lib/mpich2-1.0.3.tar.gz
new file mode 100644
index 000000000..676719b2a
Binary files /dev/null and b/tags/paradiseo-ix86-1.1/lib/mpich2-1.0.3.tar.gz differ